Suppr超能文献

利用过滤阴极电弧在Si(001)上生长的超薄类金刚石碳膜的结构

Structure of ultra-thin diamond-like carbon films grown with filtered cathodic arc on Si(001).

作者信息

Herrera-Gomez Alberto, Sun Yongjian, Aguirre-Tostado Francisco-Servando, Hwang Cherngye, Mani-Gonzalez Pierre-Giovanni, Flint Eric, Espinosa-Magaña Francisco, Wallace Robert M

机构信息

CINVESTAV-Querétaro, Qro. 76010, México.

出版信息

Anal Sci. 2010;26(2):267-72. doi: 10.2116/analsci.26.267.

Abstract

The structure of 3 nm and 15 nm diamond-like carbon films, grown on Si(001) by filtered cathodic arc, was studied by angle-resolved X-ray photoelectron spectroscopy (ARXPS) and transmission electron microscopy (TEM). The ARXPS data was deconvolved by employing simultaneous-fitting, which allowed for a clear deconvolution of the Si 2p and C 1s spectra into their different chemical contributions. An analysis of the take-off angle dependence of the peak intensities allowed for an independent identification of the physical origin of the chemical species. It was shown that the C 1s peak at 283.3 eV and the Si 2p peak at 99.6 eV correspond to SiC, and that the C/Si interface of the 3 nm film consists of a stoichiometric approximately 1 nm SiC layer. To quantify the sp(3)-sp(2) ratio it was necessary to take into account not only their associated C 1s XPS-peak intensities, but also their take-off angle dependence. The thickness of the films obtained through ARXPS closely agrees with cross-sectional TEM images.

摘要

通过过滤阴极电弧在Si(001)上生长的3纳米和15纳米类金刚石碳膜的结构,采用角分辨X射线光电子能谱(ARXPS)和透射电子显微镜(TEM)进行了研究。ARXPS数据通过同时拟合进行解卷积,这使得Si 2p和C 1s光谱能够清晰地解卷积为它们不同的化学贡献。对峰强度的出射角依赖性进行分析,可以独立识别化学物种的物理来源。结果表明,283.3 eV处的C 1s峰和99.6 eV处的Si 2p峰对应于SiC,3纳米薄膜的C/Si界面由化学计量比约为1纳米的SiC层组成。为了量化sp(3)-sp(2)比率,不仅需要考虑它们相关的C 1s XPS峰强度,还需要考虑它们的出射角依赖性。通过ARXPS获得的薄膜厚度与横截面TEM图像非常吻合。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验