University of Szeged, Department of Inorganic and Analytical Chemistry, Dóm tér 7, H-6720 Szeged, Hungary.
Appl Spectrosc. 2010 Feb;64(2):161-72. doi: 10.1366/000370210790619609.
Multi-pulse laser-induced breakdown spectroscopy (LIBS) in the collinear pulse configuration with time-integrating detection was performed on metallic samples in ambient air in an effort to clarify the contributing processes responsible for the signal enhancement observed in comparison with single-pulse excitation. Complementary experiments were also carried out on another LIBS setup using detection by an imaging spectrograph with high time resolution. The effects of laser bursts consisting of up to seven ns-range pulses from Nd-doped solid-state lasers operating at their fundamental wavelength and separated by 8.5-50 micros time gaps was studied. The ablation and emission characteristics of the generated plasmas were investigated using light profilometry, microscopy, plasma imaging, emission distribution mapping, time-resolved line emission monitoring, and plasma temperature calculations. The experimental data suggest that the two contributing processes mainly responsible for the signal enhancement effect are the plume reheating caused by the sequential laser pulses and, more dominantly, the increased material ablation attributed to the lower breakdown threshold for the preheated (molten) sample surface and/or the reduced background gas pressure behind the shockwave of preceding pulses.
采用共线脉冲配置的多脉冲激光诱导击穿光谱(LIBS)结合时间积分检测,在环境空气中对金属样品进行了实验,旨在阐明与单脉冲激发相比观察到的信号增强的贡献过程。还在另一个使用具有高时间分辨率的成像光谱仪进行检测的 LIBS 装置上进行了补充实验。研究了由 Nd 掺杂固态激光器在其基频下产生的持续时间为 7ns 量级的激光脉冲组成的激光脉冲串,脉冲间隔为 8.5-50 微秒。使用光剖面术、显微镜、等离子体成像、发射分布映射、时间分辨谱线发射监测和等离子体温度计算研究了生成等离子体的烧蚀和发射特性。实验数据表明,主要导致信号增强效应的两个贡献过程是顺序激光脉冲引起的羽流再加热,以及更主要的是由于预热(熔融)样品表面的击穿阈值降低和/或前脉冲激波后面的背景气压降低而导致的材料烧蚀增加。