Clinical and Practice Research Group, School of Pharmacy, Medical Biology Centre, Queen's University Belfast, 97 Lisburn Road, Belfast, Northern Ireland, United Kingdom.
J Chromatogr B Analyt Technol Biomed Life Sci. 2010 Mar 15;878(9-10):769-76. doi: 10.1016/j.jchromb.2010.01.031. Epub 2010 Feb 1.
A selective and sensitive liquid chromatography (LC)-atmospheric pressure chemical ionisation (APCI)-mass spectroscopic (MS) assay of canrenone has been developed and validated employing Dried Blood Spots (DBS) as the sample collection medium. DBS samples were prepared by applying 30 microl of spiked whole blood onto Guthrie cards. A 6mm disc was punched from the each DBS and extracted with 2 ml of methanolic solution of 17alpha-methyltestosterone (Internal Standard). The methanolic extract was evaporated to dryness and reconstituted in acetonitrile:water (1:9, v/v). The reconstituted solution was further subjected to solid phase extraction using HLB cartridges. Chromatographic separation was achieved using Waters Sunfire C18 reversed-phase column using isocratic elution, followed by a high organic wash to clear late eluting/highly retained components. The mobile phase consisted of methanol:water (60:40, v/v) pumped at a flow rate of 0.3 ml/min. LC-APCI-MS detection was performed in the selected-ion monitoring (SIM) mode using target ions at m/z 341.1 and 303.3 for canrenone and internal standard respectively. The selectivity of the method was established by analysing DBS samples from 6 different sources (individuals). The calibration curve for canrenone was found to be linear over 25-1000 ng/ml (r>0.994). Accuracy (% RE) and precision (% CV) values for within and between day were <20% at the lower limit of quantification (LLQC) and <15% at all other concentrations tested. The LLOQ of the method was validated at 25 ng/ml. Clinical validation of the method was achieved by employing the validated method for analysis of 160 DBS samples from 37 neonatal and paediatric patients.
建立并验证了一种采用选择性和灵敏性液相色谱(LC)-大气压化学电离(APCI)-质谱(MS)法测定坎利酮的方法,该方法采用干血斑(DBS)作为样本采集介质。通过将 30 微升加标全血点样到 Guthrie 卡上,制备 DBS 样本。从每个 DBS 上切下 6 毫米的圆片,用 2 毫升含 17α-甲基睾丸酮(内标)的甲醇溶液提取。将甲醇提取物蒸发至干燥,并用乙腈:水(1:9,v/v)重新溶解。将重新溶解的溶液进一步通过 HLB 小柱进行固相萃取。采用 Waters Sunfire C18 反相色谱柱进行等度洗脱,实现色谱分离,随后进行高有机冲洗以清除迟洗脱/高保留的组分。流动相由甲醇:水(60:40,v/v)组成,流速为 0.3ml/min。LC-APCI-MS 检测采用选择离子监测(SIM)模式,目标离子为 m/z 341.1 和 303.3,分别用于坎利酮和内标。该方法的选择性通过分析来自 6 个不同来源(个体)的 DBS 样本得到确立。坎利酮的校准曲线在 25-1000ng/ml 范围内呈线性(r>0.994)。在定量下限(LLOQ)和所有其他测试浓度下,日内和日间的准确度(%RE)和精密度(%CV)<20%。该方法的LLOQ 验证值为 25ng/ml。通过采用验证后的方法分析 37 名新生儿和儿科患者的 160 个 DBS 样本,实现了该方法的临床验证。