Department of Dental Materials Sciences, ACTA, Universiteit van Amsterdam amd Vrije Universiteit, Amsterdam, the Netherlands.
J Adhes Dent. 2010 Feb;12(1):55-62. doi: 10.3290/j.jad.a17534.
To determine whether two-step cementation of prefabricated fiber posts leads to higher bond strengths.
Forty-eight human canine teeth were divided into six groups and fiber posts were cemented with DC Core, RelyX Unicem and Panavia F2.0, according to a one-step or two-step procedure. Per root, four cross-sections were prepared. The differences in push-out strength between procedure, cement and location within the root were determined.
For all cements, the push-out strengths for the two-step procedure were significantly higher than for the one-step procedure (p < 0.001). Differences between the cements for both the one-step and two-step procedure were not statistically significant (p = 0.05).
The reduction of the C-factor by means of a two-step cementation, a procedure equivalent to the layering technique of composite restorations, resulted in significantly higher bond strengths. The increase of 60% in bond strength may be beneficial to the retention of post and core restorations.
确定两步法黏固预制纤维桩是否会提高黏结强度。
将 48 个人类恒磨牙分为 6 组,分别采用 DC 核树脂、RelyX Unicem 和 Panavia F2.0 按一步法或两步法黏固纤维桩。每根牙根制备 4 个横截面,确定黏结程序、黏固剂和牙根内位置之间的推出强度差异。
对于所有黏固剂,两步法的推出强度明显高于一步法(p < 0.001)。一步法和两步法的黏固剂之间的差异无统计学意义(p = 0.05)。
通过两步法黏固(类似于复合修复的分层技术)降低 C 因素,可显著提高黏结强度。黏结强度增加 60%可能有利于纤维桩和核修复体的固位。