Jordan Frank, Arjunan Palaniappa, Kale Sachin, Nemeria Natalia S, Furey William
Department of Chemistry, Rutgers University, Newark, New Jersey 07102.
J Mol Catal B Enzym. 2009 Nov 1;61(1-2):14-22. doi: 10.1016/j.molcatb.2009.04.008.
The region encompassing residues 401-413 on the E1 component of the pyruvate dehydrogenase multienzyme complex from Escherichia coli comprises a loop (the inner loop) which was not seen in the X-ray structure in the presence of thiamin diphosphate, the required cofactor for the enzyme. This loop is seen in the presence of a stable analogue of the pre-decarboxylation intermediate, the covalent adduct between the substrate analogue methyl acetylphosphonate and thiamin diphosphate, C2α-phosphonolactylthiamin diphosphate. It has been shown that the residue H407 and several other residues on this loop are required to reduce the mobility of the loop so electron density corresponding to it can be seen once the pre-decarboxylation intermediate is formed. Concomitantly, the loop encompassing residues 541-557 (the outer loop) appears to work in tandem with the inner loop and there is a hydrogen bond between the two loops ensuring their correlated motion. The inner loop was shown to: a) sequester the active center from carboligase side reactions; b) assist the interaction between the E1 and the E2 components, thereby affecting the overall reaction rate of the entire multienzyme complex; c) control substrate access to the active center. Using viscosity effects on kinetics it was shown that formation of the pre-decarboxylation intermediate is specifically affected by loop movement. A cysteine-less variant was created for the E1 component, onto which cysteines were substituted at selected loop positions. Introducing an electron spin resonance spin label and an (19)F NMR label onto these engineered cysteines, the loop mobility was examined: a) both methods suggested that in the absence of ligand, the loop exists in two conformations; b) line-shape analysis of the NMR signal at different temperatures, enabled estimation of the rate constant for loop movement, and this rate constant was found to be of the same order of magnitude as the turnover number for the enzyme under the same conditions. Furthermore, this analysis gave important insights into rate-limiting thermal loop dynamics. Overall, the results suggest that the dynamic properties correlate with catalytic events on the E1 component of the pyruvate dehydrogenase complex.
来自大肠杆菌的丙酮酸脱氢酶多酶复合体E1组分上包含401 - 413位残基的区域有一个环(内环),在存在硫胺二磷酸(该酶所需的辅因子)的情况下,其在X射线结构中未出现。在存在预脱羧中间体的稳定类似物(底物类似物甲基乙酰膦酸与硫胺二磷酸之间的共价加合物,即C2α - 膦酰基乳酸硫胺二磷酸)的情况下可看到这个环。已表明该环上的H407残基和其他几个残基是降低环的流动性所必需的,这样一旦形成预脱羧中间体就能看到与之对应的电子密度。同时,包含541 - 557位残基的环(外环)似乎与内环协同作用,并且两个环之间存在氢键以确保它们的协同运动。内环被证明具有以下作用:a)将活性中心与羧化酶的副反应隔离开;b)协助E1和E2组分之间的相互作用,从而影响整个多酶复合体的总体反应速率;c)控制底物进入活性中心。利用动力学上的粘度效应表明,预脱羧中间体的形成特别受环运动的影响。为E1组分构建了一个无半胱氨酸变体,并在选定的环位置替换上半胱氨酸。在这些工程化的半胱氨酸上引入电子自旋共振自旋标记和(19)F NMR标记,对环的流动性进行了研究:a)两种方法均表明在没有配体的情况下,环以两种构象存在;b)通过对不同温度下NMR信号的线形分析,能够估算环运动的速率常数,并且发现该速率常数与相同条件下酶的周转数处于同一数量级。此外,该分析为限速热环动力学提供了重要见解。总体而言,结果表明动态特性与丙酮酸脱氢酶复合体E1组分上的催化事件相关。