Department of Mechanical Engineering, National Kaohsiung University of Applied Sciences, Kaohsiung 807, Taiwan.
J Colloid Interface Sci. 2010 May 1;345(1):19-26. doi: 10.1016/j.jcis.2010.01.052. Epub 2010 Jan 25.
The interface and nanoindentation mechanisms of alkanethiol self-assembled monolayers (SAMs) chemisorbed on a gold surface are investigated using molecular dynamics simulation. The mechanisms include the nanoindentation depths, the workpiece temperatures, the numbers of SAM layers, the length of united-atoms per chain, and the shapes of the indenters. The simulation results show that the disorder and the plastic mobility of SAM chains increased with increasing indentation depth. The relaxation force and the plastic energy almost linearly increased with increasing indentation depth. The disorder region after indentation at high temperature is larger than that at low temperature. The adhesive force shows a dependence on temperature during indentation. The potential energy decreases with increasing number of SAM layers. The structural morphologies of the SAMs were not affected at the third layers for SAM film with four layers. The maximum load quickly decreases for film with two SAM layers. The structures of the SAM can be easily tilted and bent when the united-atoms per chain length is long. The SAM atoms become more disorderly and the elastic recovery is smaller when the SAM length of the united-atoms per chain is long after indentation.
采用分子动力学模拟研究了化学吸附在金表面的烷硫醇自组装单分子层(SAM)的界面和纳米压痕机制。这些机制包括纳米压痕深度、工件温度、SAM 层数、链中联合原子的数量和压头的形状。模拟结果表明,随着压痕深度的增加,SAM 链的无序性和塑性流动性增加。随着压痕深度的增加,松弛力和塑性能几乎呈线性增加。高温下压痕后的弛豫区域大于低温下的弛豫区域。在压痕过程中,粘附力随温度而变化。随着 SAM 层数的增加,位能减小。对于四层 SAM 膜,在第三层 SAM 膜上,SAM 的结构形态不受影响。对于两层 SAM 膜,最大载荷迅速减小。当链中联合原子的数量较长时,SAM 结构很容易倾斜和弯曲。当链中联合原子的数量较长时,SAM 原子在压痕后变得更加无序,弹性恢复更小。