Department of Biomedical Engineering, University Medical Center Groningen, Groningen and University of Groningen, P.O. Box 196, 9700 AD Groningen, The Netherlands.
J Biomed Mater Res A. 2010 Aug;94(2):533-8. doi: 10.1002/jbm.a.32731.
Biomaterials-associated infections (BAI) constitute a major clinical problem and often necessitate implant replacement. In this study, the race for the surface between Staphylococcus epidermidis ATCC 35983 and U2OS osteosarcoma cells is studied on biomaterials with different wettabilities and on a polymer-brush coating. S. epidermidis was deposited on the different surfaces in a parallel plate flow chamber and then U2OS cells were seeded. Subsequently, staphylococci and U2OS cells were allowed to grow simultaneously on the surfaces for 48 h under low flow conditions. The presence of staphylococci reduced cell growth on all surfaces, but adhering cells spread equally well in the absence and presence of staphylococci. A hydrophilic polymer-brush coating discouraged bacterial and cellular adhesion and growth. Thus, whereas the biomaterials evaluated support both biofilm formation and tissue integration, polymer-brush coatings support neither. Therewith, the outcome of the race for the surface on these surfaces remains uncertain, emphasizing the need for biofunctionalized surfaces that discourage biofilm formation and support tissue growth at the same time.
生物材料相关性感染(BAI)是一个主要的临床问题,往往需要更换植入物。在这项研究中,研究了不同润湿性的生物材料和聚合物刷涂层上表皮葡萄球菌 ATCC 35983 和 U2OS 骨肉瘤细胞之间的表面竞争。表皮葡萄球菌在平行板流动室中沉积在不同的表面上,然后接种 U2OS 细胞。随后,在低流速条件下,将表皮葡萄球菌和 U2OS 细胞同时在表面上生长 48 小时。葡萄球菌的存在减少了所有表面上的细胞生长,但粘附细胞在没有和存在葡萄球菌的情况下同样均匀地扩散。亲水性聚合物刷涂层阻碍了细菌和细胞的粘附和生长。因此,虽然评估的生物材料既支持生物膜的形成又支持组织整合,但聚合物刷涂层既不支持生物膜的形成也不支持组织的生长。因此,这些表面上的表面竞争结果仍然不确定,强调需要生物功能化表面,以阻止生物膜的形成并同时支持组织的生长。