Health Effects Laboratory Division, National Institute For Occupational Safety and Health, Morgantown, WV 26505, USA.
Arch Toxicol. 2010 Jul;84(7):521-40. doi: 10.1007/s00204-010-0525-9. Epub 2010 Mar 12.
The potential for development of Parkinson's disease (PD)-like neurological dysfunction following occupational exposure to aerosolized welding fumes (WF) is an area of emerging concern. Welding consumables contain a complex mixture of metals, including iron (Fe) and manganese (Mn), which are known to be neurotoxic. To determine whether WF exposure poses a neurological risk particularly to the dopaminergic system, we treated Sprague-Dawley rats with WF particulates generated from two different welding processes, gas metal arc-mild steel (GMA-MS; low Mn, less water-soluble) and manual metal arc-hard surfacing (MMA-HS; high Mn, more water-soluble) welding. Following repeated intratracheal instillations (0.5 mg/rat, 1/week x 7 weeks) of GMA-MS or MMA-HS, elemental analysis and various molecular indices of neurotoxicity were measured at 1, 4, 35 or 105 days after last exposure. MMA-HS exposure, in particular, led to increased deposition of Mn in striatum and midbrain. Both fumes also caused loss of tyrosine hydroxylase (TH) protein in the striatum (20%) and midbrain (30%) by 1 day post-exposure. While the loss of TH following GMA-MS was transient, a sustained loss (34%) was observed in the midbrain 105 days after cessation of MMA-HS exposure. In addition, both fumes caused persistent down-regulation of dopamine D2 receptor (Drd2; 30-40%) and vesicular monoamine transporter 2 (Vmat2; 30-55%) mRNAs in the midbrain. WF exposure also modulated factors associated with synaptic transmission, oxidative stress, neuroinflammation and gliosis. Collectively, our findings demonstrate that repeated exposure to Mn-containing WF can cause persistent molecular alterations in dopaminergic targets. Whether such perturbations will lead to PD-like neuropathological manifestations remains to be elucidated.
职业性接触气溶胶化焊接烟尘(WF)后帕金森病(PD)样神经功能障碍的发展潜力是一个新出现的关注点。焊接耗材含有复杂的金属混合物,包括铁(Fe)和锰(Mn),已知它们具有神经毒性。为了确定 WF 暴露是否对多巴胺能系统构成神经风险,我们用两种不同焊接工艺产生的 WF 颗粒处理 Sprague-Dawley 大鼠,这两种工艺分别是:金属气体电弧-低碳钢(GMA-MS;锰含量低,水溶性较低)和手动金属电弧-硬面(MMA-HS;锰含量高,水溶性较高)焊接。在反复气管内滴注(0.5mg/只,1/周 x 7 周)GMA-MS 或 MMA-HS 后,在末次暴露后 1、4、35 或 105 天测量元素分析和各种神经毒性的分子指标。特别是 MMA-HS 暴露导致纹状体和中脑 Mn 沉积增加。两种烟尘在暴露后 1 天还导致纹状体和中脑酪氨酸羟化酶(TH)蛋白损失(分别为20%和30%)。虽然 GMA-MS 引起的 TH 损失是短暂的,但在 MMA-HS 暴露停止后 105 天,中脑仍持续损失(34%)。此外,两种烟尘均导致中脑多巴胺 D2 受体(Drd2;30-40%)和囊泡单胺转运体 2(Vmat2;30-55%)mRNA 持续下调。WF 暴露还调节了与突触传递、氧化应激、神经炎症和神经胶质增生相关的因素。总之,我们的研究结果表明,反复接触含 Mn 的 WF 会导致多巴胺能靶标持续的分子改变。这种改变是否会导致 PD 样神经病理学表现还有待阐明。