Uthe E E
Appl Opt. 1982 Feb 1;21(3):454-9. doi: 10.1364/AO.21.000454.
As the first phase of a program to develop a lidar method for remote evaluation of mean particle size of stationary source emissions, a data base was experimentally collected consisting of multiple-wavelength extinction coefficients and mean particle sizes of generated aerosols. Extinction data were collected using multi-wavelength (14) transmissometers and a 10-m long aerosol tunnel facility. Generated aerosols consisted of five size fractions of fly ash, three size fractions of silica, and single-size fractions of six other types of particulate material. Particle size evaluations were made by multistage impactor and by air permeability (Fisher) analysis of packed powder. The data base indicates that mean particle size smaller than l-microm diam could be estimated usefully from aerosol extinction measurements using a single-laser lidar system operating at 1.06- and 0.53-microm wavelengths. For larger mean particle sizes the extinction ratio is near unity, and longer wavelength systems are required. The data indicate that a two-laser lidar operating at 10.6 and 0.53 microm could provide estimates of mean particle size to diameters of at least 6 microm.
作为开发用于远程评估固定源排放物平均粒径的激光雷达方法项目的第一阶段,通过实验收集了一个数据库,其中包括多波长消光系数和生成气溶胶的平均粒径。使用多波长(14个)透射仪和一个10米长的气溶胶隧道设施收集消光数据。生成的气溶胶包括五个粒径级分的粉煤灰、三个粒径级分的二氧化硅以及其他六种颗粒材料的单粒径级分。通过多级冲击器以及对压实粉末进行透气率(费希尔)分析来评估粒径。该数据库表明,对于平均粒径小于1微米的情况,使用工作在1.06微米和0.53微米波长的单激光雷达系统,通过气溶胶消光测量可以有效地估算平均粒径。对于较大的平均粒径,消光比接近1,需要更长波长的系统。数据表明,工作在10.6微米和0.53微米的双激光雷达能够提供至少6微米直径的平均粒径估计值。