Department of Chemical and Biological Engineering, Chalmers University of Technology, SE-412 96 Göteborg, Sweden.
Langmuir. 2010 Jun 15;26(12):9276-82. doi: 10.1021/la1001336.
Three ester-containing cationic gemini surfactants, two with decanoyl chains and either a three-carbon or a six-carbon spacer unit and one with dodecanoyl chains and a three-carbon spacer, were synthesized and evaluated. A corresponding monomeric cationic ester surfactant was used for comparison. This type of amphiphile, a so-called esterquat, is known to undergo rapid hydrolysis above the critical micelle concentration because of micellar catalysis. The esterquat geminis of this work were found to be much more susceptible to hydrolysis than the esterquat monomer. This difference is believed to be caused by anchimeric assistance by the second cationic headgroup in the gemini amphiphiles. However, there is no correlation between the rate of chemical hydrolysis and the rate of biodegradation. The monomeric esterquat, which is the most stable in the chemical hydrolysis experiments, was the only surfactant that passed the test for "readily biodegradable". We also observed a considerable difference in the hydrolysis rate within the small series of gemini surfactants. The amphiphile with two decanoyl chains and a three-carbon spacer, N,N'-bis(2-(decanoyloxy)ethyl)-N,N,N',N'-tetramethyl-1,3-propanediammonium dibromide, had the fastest rate of hydrolysis. This surfactant also exhibited a considerably lower degree of micelle ionization than the other surfactants, which is believed to be due to the closer proximity of the charged groups on the micelle surface. A small distance between headgroups will give more pronounced neighboring group participation, accounting for the increased rate of hydrolysis. An interesting property of the surfactant that is the most susceptible to hydrolysis is that it gives rise to an extremly stable foam. We propose that the foam stability is a result of the partial hydrolysis of the surfactant generating sodium decanoate, an anionic surfactant, that forms a mixed film with the starting cationic gemini surfactant. It is known that mixed monolayers in which there is a strong attractive interaction between surfactant headgroups can lead to stable foams.
三种含酯基的阳离子双子表面活性剂,两种含有癸酰链和三碳或六碳间隔基,一种含有十二酰链和三碳间隔基,被合成并进行了评价。同时使用相应的单体阳离子酯表面活性剂进行了比较。这种两亲分子,所谓的酯季铵盐,由于胶束催化作用,已知在临界胶束浓度以上会迅速水解。本工作中的酯季铵盐双子表面活性剂比酯季铵盐单体更容易水解。这种差异被认为是由于双子表面活性剂中的第二个阳离子头基的亲核协助。然而,化学水解速率与生物降解速率之间没有相关性。在化学水解实验中最稳定的单体酯季铵盐是唯一通过“易生物降解”测试的表面活性剂。我们还观察到在这一小系列双子表面活性剂中水解速率有相当大的差异。含有两个癸酰链和三碳间隔基的两亲分子,N,N'-双(2-(癸酰氧基)乙基)-N,N,N',N'-四甲基-1,3-丙二铵二溴化物,具有最快的水解速率。这种表面活性剂的胶束电离程度也明显低于其他表面活性剂,这被认为是由于胶束表面上带电基团的距离更近。头基之间的小距离将导致相邻基团参与程度更高,从而解释了水解速率的增加。最易水解的表面活性剂具有一个有趣的性质,它产生了极其稳定的泡沫。我们提出,泡沫稳定性是表面活性剂部分水解生成的癸酸钠的结果,癸酸钠是一种阴离子表面活性剂,与起始的阳离子双子表面活性剂形成混合膜。众所周知,在混合单层中,如果表面活性剂头基之间存在强烈的吸引力相互作用,可以导致稳定的泡沫。