Department of Radiology and Research Institute of Radiology, University of Ulsan College of Medicine, Asan Medical Center, Seoul, Korea.
Invest Radiol. 2010 Jun;45(6):354-61. doi: 10.1097/RLI.0b013e3181dfdae0.
To assess the feasibility of xenon ventilation computed tomography (CT) for evaluating ventilation abnormality in asthmatics.
Twenty-two, stable asthmatics (M:F = 10:12; mean age, 57.6) were included. Single-phase, whole-thorax, dual-energy CT was performed using dual-source CT (Somatom Definition, Siemens) after subjects had inhaled 30% xenon for 90 seconds. Parameters include 512 x 512 matrix; 14 x 1.2 mm collimation; 40/140 eff. mAs at 140/80 kV; 0.45 pitch; and 0.33 seconds rotation time. On the color-coded xenon map, the extent of the ventilation defect was visually assessed using a 5-point scale in each lobe (0, absent defect; 1, 0%-25%; 2, 25%-50%; 3, 50%-75%; and 4, 75%-100%), which was defined as defect score. On the weighted average image, airway wall dimensions were measured at 4 segmental bronchi in both upper and lower lobes. Patients were classified into a defect group and a defect-free group based on the presence of defects shown on the xenon map. Pulmonary function test parameters and airway wall dimensions were compared in those 2 groups. Correlation analyses between the defect score, pulmonary function test, and airway wall dimensions were performed.
Sixteen asthmatics showed peripheral ventilation defects on the xenon map (defect score, 6.6 +/- 4.2). The defect group had a significantly lower forced expiratory volume in 1 second (FEV1) and thicker airway wall than that of the defect-free group (P = 0.04 and 0.02, respectively). The defect score correlated negatively with a ratio of FEV1 and forced vital capacity (FEV1/FVC) (r = -0.44, P = 0.04) and corrected diffusing capacity (r = -0.76, P = 0.04) and correlated positively with total lung capacity, functional residual volume, and residual volume (r = 0.90, P = 0.005; r= 0.99, P < 0.001; r = 0.88, P = 0.008, respectively).
The ventilation defects appeared on xenon ventilation CT in asthmatics with more severe airflow limitation and airway wall thickening. The extent of the ventilation defects showed correlations with parameters of pulmonary function test.
评估氙气通气 CT 评估哮喘患者通气异常的可行性。
纳入 22 例稳定期哮喘患者(M:F=10:12;平均年龄 57.6 岁)。在患者吸入 30%氙气 90 秒后,使用双源 CT(Siemens Somatom Definition)进行单相全胸、双能量 CT 检查。参数包括 512x512 矩阵;14x1.2mm 准直器;140/80kV 时的 512x512 矩阵;0.45 螺距;0.33 秒旋转时间。在彩色编码的氙气图上,使用 5 分制视觉评估每个肺叶的通气缺陷范围(0,无缺陷;1,0%-25%;2,25%-50%;3,50%-75%;4,75%-100%),定义为缺陷评分。在加权平均图像上,在上下叶的 4 个节段性支气管上测量气道壁尺寸。根据氙气图上显示的缺陷将患者分为缺陷组和无缺陷组。比较两组患者的肺功能检查参数和气道壁尺寸。对缺陷评分、肺功能检查和气道壁尺寸进行相关性分析。
16 例哮喘患者在氙气图上显示周围通气缺陷(缺陷评分 6.6+/-4.2)。缺陷组的用力呼气量 1 秒率(FEV1)和气道壁厚度明显低于无缺陷组(P=0.04 和 0.02)。缺陷评分与 FEV1 和用力肺活量(FEV1/FVC)的比值呈负相关(r=-0.44,P=0.04),与校正弥散量(r=-0.76,P=0.04)呈正相关,与肺活量(r=0.90,P=0.005)、功能残气量(r=0.99,P<0.001)和残气量(r=0.88,P=0.008)呈正相关。
在气流受限更严重和气道壁增厚的哮喘患者中,氙气通气 CT 上出现通气缺陷。通气缺陷的程度与肺功能检查参数相关。