Determination of low levels of amorphous content in inhalation grade lactose by moisture sorption isotherms.

Alpha-lactose monohydrate is widely used as an excipient in dry powder inhalers, and plays a very important role in the efficiency of the drug delivery. Due to the processing, low levels of amorphous lactose could be present in the blends. Varying amounts could have a strong effect on the efficiency of drug delivery of the powder blends. Therefore, the accurate measurement of low levels of amorphous lactose content is very important. A new method was developed to measure the amorphous content, based on dynamic vapour sorption (DVS). In contrast to the traditional re-crystallization approach of amorphous lactose, the new method is based on moisture sorption isotherms. Moisture sorption isotherms of blends of crystalline alpha-lactose and freeze-dried or spray-dried amorphous lactose were measured. By fitting the data with a Brunauer, Emmett, and Teller (BET) isotherm, a linear correlation was found between measured and actual amorphous content for the whole range of 0.1-100%. Differences between freeze-dried and spray-dried lactose, due to different molecular arrangements, could be removed by a preconditioning the samples at 35% RH prior to the isotherm measurement. It was shown that accurate determination of very low concentrations of amorphous lactose content is possible using moisture sorption isotherm analyses.