Schoenwald K, Peng Z C, Noga D, Qiu S R, Sulchek T
G. W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, USA.
Rev Sci Instrum. 2010 May;81(5):053704. doi: 10.1063/1.3395879.
We have designed and built a microfluidic liquid cell capable of high-resolution atomic force microscope (AFM) imaging and force spectroscopy. The liquid cell was assembled from three molded poly(dimethylsiloxane) (PDMS) pieces and integrated with commercially purchased probes. The AFM probe was embedded within the assembly such that the cantilever and tip protrude into the microfluidic channel. This channel is defined by the PDMS assembly on the top, a PDMS gasket on all four sides, and the sample substrate on the bottom, forming a liquid-tight seal. Our design features a low volume fluidic channel on the order of 50 nl, which is a reduction of over 3-5 orders of magnitude compared to several commercial liquid cells. This device facilitates testing at high shear rates and laminar flow conditions coupled with full AFM functionality in microfluidic aqueous environments, including execution of both force displacement curves and high resolution imaging.
