Office of Mine Safety and Health Research, National Institute for Occupational Safety and Health, 626 Cochrans Mill Road, PO Box 18070, Pittsburgh, PA 15236, United States.
Appl Ergon. 2010 Dec;42(1):106-13. doi: 10.1016/j.apergo.2010.05.007. Epub 2010 Jun 15.
This study examines stress transmitted to anatomic landmarks of the knee (patella, combined patella tendon and tibial tubercle) while in static kneeling postures without kneepads and while wearing two kneepads commonly worn in the mining industry. Ten subjects (7 male, 3 female) simulated postures utilized in low-seam mines: kneeling in full flexion; kneeling at 90° of knee flexion; and kneeling on one knee while in one of three kneepad states (no kneepads, non-articulated kneepads, and articulated kneepads). For each posture, peak and mean pressure on the anatomic landmarks of the knee were obtained. The majority of the pressure was found to be transmitted to the knee via the combined patellar tendon and tibial tubercle rather than through the patella. While the kneepads tested decreased the maximum pressure experienced at the combined patellar tendon and tibial tubercle, peak pressures of greater than 25 psi were still experienced over structures commonly injured in mining (e.g. bursa sac - bursitis/Miner's Knee). The major conclusion of this study is that novel kneepad designs that redistribute the stresses at the knee across a greater surface area and to other regions of the leg away from key structures of the knee are needed.
本研究考察了在静态跪姿下(无护膝和使用两种矿业中常见的护膝),膝盖(髌骨、髌骨联合肌腱和胫骨结节)承受的解剖标志的压力。10 名受试者(7 名男性,3 名女性)模拟了低煤层中使用的姿势:全屈膝跪地;膝关节弯曲 90°跪地;单膝跪地,同时处于三种护膝状态之一(无护膝、非关节护膝和关节护膝)。对于每种姿势,都获得了膝盖解剖标志上的峰值和平均压力。研究发现,大部分压力是通过髌骨联合肌腱和胫骨结节传递到膝盖的,而不是通过髌骨。虽然测试的护膝降低了髌骨联合肌腱和胫骨结节上的最大压力,但仍在矿工常见受伤的结构(如滑囊囊-滑囊炎/矿工膝)上感受到超过 25 磅/平方英寸的峰值压力。本研究的主要结论是,需要设计新型护膝,将膝盖上的压力重新分配到更大的表面积上,并将其分布到远离膝盖关键结构的腿部其他区域。