Erwin L. Hahn Institute for Magnetic Resonance Imaging, University Duisburg-Essen, Essen, Germany.
Magn Reson Med. 2010 Aug;64(2):327-33. doi: 10.1002/mrm.22527.
As the field strength and, therefore, the operational frequency in MRI is increased, the wavelength approaches the size of the human head/body, resulting in wave effects, which cause signal decreases and dropouts. Several multichannel approaches have been proposed to try to tackle these problems, including RF shimming, where each element in an array is driven by its own amplifier and modulated with a certain (constant) amplitude and phase relative to the other elements, and Transmit SENSE, where spatially tailored RF pulses are used. In this article, a relatively inexpensive and easy to use imaging scheme for 7 Tesla imaging is proposed to mitigate signal voids due to B(1)(+) field inhomogeneity. Two time-interleaved images are acquired using a different excitation mode for each. By forming virtual receive elements, both images are reconstructed together using GRAPPA to achieve a more homogeneous image, with only small SNR and SAR penalty in head and body imaging at 7 Tesla.
随着 MRI 中的场强和工作频率增加,波长接近人体头部/身体的大小,从而产生波的影响,导致信号减少和丢失。已经提出了几种多通道方法来尝试解决这些问题,包括 RF 匀场,其中阵列中的每个元件都由自己的放大器驱动,并相对于其他元件以一定(恒定)的幅度和相位进行调制,以及 Transmit SENSE,其中使用空间定制的 RF 脉冲。在本文中,提出了一种相对便宜且易于使用的 7T 成像成像方案,以减轻由于 B(1)(+) 场非均匀性导致的信号缺失。通过使用不同的激励模式获取两个时间交错的图像。通过形成虚拟接收元件,使用 GRAPPA 一起重建两幅图像,以实现更均匀的图像,在 7T 头部和身体成像中只有很小的 SNR 和 SAR 惩罚。