Institute on Membrane Technology, National Research Council of Italy, ITM-CNR, C/O University of Calabria, via P. Bucci cubo 17/C, Rende (CS), Italy.
Biomaterials. 2010 Sep;31(27):7000-11. doi: 10.1016/j.biomaterials.2010.05.079. Epub 2010 Jun 25.
In neuronal tissue engineering many efforts are focused on creating biomaterials with physical and chemical pathways for controlling cellular proliferation and orientation. Neurons have the ability to respond to topographical features in their microenvironment causing among others, axons to proliferate along surface features such as substrate grooves in micro-and nanoscales. As a consequence these neuronal elements are able to correctly adhere, migrate and orient within their new environment during growth. Here we explored the polarization and orientation of hippocampal neuronal cells on nonpatterned and micro-patterned biodegradable poly(l-lactic acid) (PLLA) membranes with highly selective permeable properties. Dense and porous nonpatterned and micro-patterned membranes were prepared from PLLA by Phase Separation Micromolding. The micro-patterned membranes have a three-dimensional structure consisting of channels and ridges and of bricks of different widths. Nonpatterned and patterned membranes were used for hippocampal neuronal cultures isolated from postnatal days 1-3 hamsters and the neurite length, orientation and specific functions of cells were investigated up to 12 days of culture. Neurite outgrowth, length plus orientation tightly overlapped the pattern of the membrane surface. Cell distribution occurred only in correspondence to membrane grooves characterized by continuous channels whereas on membranes with interconnected channels, cells not only adhered to and elongated their cellular processes in the grooves but also in the breaking points. High orientation degrees of cells were determined particularly on the patterned porous membranes with channel width of 20 mum and ridges of 17 mum whereas on dense nonpatterned membranes as well as on polystyrene culture dish (PSCD) controls, a larger number of primary developed neurites were distributed. Based on these results, PLLA patterned membranes may directly improve the guidance of neurite extension and thereby enhancing their orientation with a consequently highly ordered neuronal cell matrix, which may have strong bearings on the elucidation of regeneration mechanisms.
在神经组织工程中,许多研究工作集中在创建具有物理和化学途径的生物材料,以控制细胞的增殖和定向。神经元具有响应微环境中形貌特征的能力,这会导致轴突沿着表面特征(如微纳尺度下的基底沟槽)增殖。因此,这些神经元元件能够在生长过程中正确地在新环境中黏附、迁移和定向。在这里,我们探索了海马神经元细胞在非图案化和微图案化可生物降解聚(L-丙交酯)(PLLA)膜上的极化和定向,这些膜具有高度选择性的渗透性。通过相分离微成型法从 PLLA 制备致密且多孔的非图案化和微图案化膜。微图案化膜具有由通道和脊组成的三维结构,以及不同宽度的砖形结构。非图案化和图案化膜用于培养来自出生后 1-3 天的仓鼠的海马神经元,并在培养 12 天内研究细胞的突起长度、定向和特定功能。轴突生长、长度加定向与膜表面的图案紧密重叠。细胞分布仅发生在具有连续通道的膜沟槽对应处,而在具有相互连接通道的膜上,细胞不仅黏附在沟槽中并延长其细胞突起,而且在断裂点也会延长。特别是在通道宽度为 20 微米且脊宽为 17 微米的图案化多孔膜上,确定了细胞的高定向度,而在致密的非图案化膜以及聚苯乙烯培养皿(PSCD)对照上,更多的初始发育轴突分布。基于这些结果,PLLA 图案化膜可以直接改善轴突延伸的导向,从而提高其定向性,形成具有高度有序的神经元细胞基质,这可能对阐明再生机制具有重要意义。