Department of Orthopaedic Surgery, University of Virginia School of Medicine, Charlottesville, VA 22908, USA.
Bone. 2010 Aug;47(2):197-204. doi: 10.1016/j.bone.2010.05.023. Epub 2010 May 24.
Bone defects in vertebral bodies (VB) usually occur after the reduction of fractures or are caused by bone disease. Besides the treatment of original disease, repair of the bone defect can restore the structure of VB and improve stabilization of the spine to protect the spinal cord nerves. To aid studies of the efficacy of bioengineering techniques for repair of VB, we developed a rat model with a critical size bone defect in VB. Air-motivated burrs were used to create two sizes of bone defect (2 x 3 x 1.5 mm; 2 x 3 x 3 mm) in the anterior part of VB in 6-month-old Fischer 344 rats. Quantitative CT analyses and histological assays demonstrated that neither defects self-repaired by 8 weeks post surgery. Moreover, the tendency of bone formation was monitored in the same animal by serial CT image evaluations, allowing us to demonstrate that there was significant bone growth during the 4- to 6-week period after the creation of the bone defect. We then implanted sintered poly(lactic-co-glycolic acid) (PLGA) microsphere scaffolds loaded with Matrigel with or without recombinant human bone morphogenetic protein 2 (rhBMP2; 2.0 microg rhBMP2/10 microL Matrigel/scaffold) into the bone defect (2 x 3 x 3 mm) in the VB. Bone formation was detected by quantitative analyses of serial CT images, which demonstrated bone growth in rats that received the rhBMP2 implant, in both surrounding areas and inside area of the scaffold. In addition to a rapid increase within 2 weeks of the operation, another significant bone formation period was found between 4 and 8 weeks after the implantation. By contrast, the control group that received the implant without rhBMP2 did not show similar bone formation tendencies. The results of CT analyses were confirmed by histological studies. This study suggests that a critical size bone defect of the anterior VB can be developed in a rat model. Characterization of this model demonstrated that 4 to 6 weeks after creation of the defect was a significant bone growth period for VB bone repair in rats. This animal model has further utility for the study of different biomaterials for VB bone repair. Implantation of a bioactive PLGA scaffold carrying rhBMP2 allowed more successful repair of the VB defect. Although further characterization studies are needed, the bioactive PLGA scaffold developed in this study will likely adapt easily to other in vivo osteogenesis applications.
椎体(VB)中的骨缺损通常发生在骨折复位后,或者由骨病引起。除了治疗原发病外,修复骨缺损可以恢复 VB 的结构,提高脊柱的稳定性,保护脊髓神经。为了辅助研究生物工程技术修复 VB 的疗效,我们建立了一个 VB 临界尺寸骨缺损大鼠模型。我们使用气动磨头在 6 月龄 Fischer 344 大鼠 VB 前部分别创建了两种大小的骨缺损(2 x 3 x 1.5 毫米;2 x 3 x 3 毫米)。定量 CT 分析和组织学检测表明,术后 8 周内,两种缺损均未自行修复。此外,我们通过连续 CT 图像评估在同一动物中监测骨形成趋势,从而证明在骨缺损形成后 4 至 6 周期间存在显著的骨生长。然后,我们将负载 Matrigel 的烧结聚乳酸-共-羟基乙酸(PLGA)微球支架(2.0 μg rhBMP2/10 μL Matrigel/支架)植入 VB(2 x 3 x 3 毫米)中的骨缺损中。通过连续 CT 图像的定量分析检测到骨形成,结果表明,植入 rhBMP2 的大鼠在支架周围和内部区域均有骨生长。除了术后 2 周内迅速增加外,在植入后 4 至 8 周之间还发现了另一个显著的骨形成期。相比之下,植入不含 rhBMP2 的支架的对照组没有显示出类似的骨形成趋势。CT 分析的结果通过组织学研究得到了证实。这项研究表明,大鼠 VB 可以建立临界尺寸的骨缺损模型。该模型的特征表明,在创建缺陷后 4 至 6 周是大鼠 VB 骨修复的显著骨生长期。这种动物模型对 VB 骨修复不同生物材料的研究具有进一步的应用价值。植入负载 rhBMP2 的生物活性 PLGA 支架可以更成功地修复 VB 缺陷。尽管需要进一步的特征描述研究,但本研究中开发的生物活性 PLGA 支架可能很容易适应其他体内成骨应用。