United States Army Medical Research Institute of Chemical Defense, Aberdeen Proving Ground, Aberdeen, MarylandUSA.
Toxicol Mech Methods. 2002;12(1):59-70. doi: 10.1080/15376510209167936.
Sulfur mustard (HD) is a vesicant compound that was first used as a chemical warfare agent in World War I. (Papirmeister et al. 1991). Numerous animal models have been used to study HD-induced vesication. In this article, we describe modifications of the vapor cup model of Mershon and colleagues (1990) to establish a new vapor cup model for use in neonatal mice. The need to develop this model resulted from the development of gene-targeted knockout mice that can be used to evaluate the function of specific genes and their contribution to HD-induced pathology. However, the knockouts are haired mice; therefore, it is necessary to perform vapor exposures on the pups prior to their growing hair. Neonatal mice were anesthetized with isofluorane inhalation and placed in sternal recumbency on a 37 degrees C isothermal pad to maintain body heat during exposure. The vapor cup consisted of a 1.5-mL microfuge tube cap (8 mm inside diameter) modified using a Dremel tool to contour its rim to better fit the curve of a mouse pups back. The inside of the cap was fitted with an 8-mm disk of Whatman #2 filter paper, and the rim of the cap was coated with a thin bead of Thomas Lubriseal grease. Ten muL of neat HD was placed on the filter paper disk, and the cup was immediately inverted and placed onto the back of an anesthetized mouse pup. Exposure times varied from 10 to 30 min. At 24 h postexposure, the mice were euthanized; the HD-exposed skin was removed and fixed in 10% neutral buffered formalin. Following a minimum of 24 h of formalin fixation, the skin sections were bisected across the exposed area. The sections were embedded in paraffin with the central straight-cut surfaces being the focus of histological evaluation. The amount of damage associated with the HD vapor cup exposure varied with time in a dose response fashion. Typical damage consisted of varying amounts of epidermal necrosis at the basal cell level, with occasional separation of epidermis from dermis (microvesication). In severe cases there was complete coagulation of the epidermis and no microvesication. This model should prove useful in identifying the biochemical mechanism of action of HD and ultimately aid in the evaluation of treatment compounds. It may also provide a relevant exposure model for other compounds for which the assessment of vapor-induced damage is necessitated.
硫芥(HD)是一种水疱性化合物,于第一次世界大战中首次被用作化学战剂。(Papirmeister 等人,1991 年)。已经使用了许多动物模型来研究 HD 诱导的水疱形成。在本文中,我们描述了 Mershon 及其同事(1990 年)蒸气杯模型的改进,以建立用于新生小鼠的新型蒸气杯模型。开发这种模型的需求源于基因靶向敲除小鼠的发展,这些小鼠可用于评估特定基因的功能及其对 HD 诱导的病理学的贡献。但是,敲除的是有毛的老鼠;因此,有必要在它们的毛发长出来之前对幼崽进行蒸气暴露。新生小鼠用异氟烷吸入麻醉,并置于 37°C 恒温垫上的胸骨卧位,以在暴露过程中保持体温。蒸气杯由 1.5mL 微量离心管盖(内径 8mm)组成,使用 Dremel 工具对其边缘进行修改,使其轮廓更适合幼鼠背部的曲线。管盖的内部装有 8mm 直径的 Whatman#2 滤纸圆盘,管盖的边缘涂有一层薄薄的 Thomas Lubriseal 油脂。将 10μL 纯 HD 放在滤纸圆盘上,然后立即将杯子倒置并放在麻醉幼鼠的背部。暴露时间从 10 到 30 分钟不等。暴露后 24 小时,处死小鼠;将暴露的皮肤取下并固定在 10%中性缓冲福尔马林溶液中。固定至少 24 小时后,将皮肤切片沿暴露区域横切。将切片用石蜡包埋,中央直切面是组织学评估的重点。与 HD 蒸气杯暴露相关的损伤量随时间呈剂量反应方式而变化。典型的损伤包括基底层的表皮坏死程度不同,偶尔表皮与真皮分离(微水疱)。在严重的情况下,表皮完全凝固,没有微水疱。该模型应该有助于确定 HD 的生化作用机制,并最终有助于评估治疗化合物。它还可以为其他需要评估蒸气诱导损伤的化合物提供相关的暴露模型。