Department of Biotechnology, Indian Institute of Technology Madras, Chennai 600036, India.
J Biomed Mater Res A. 2010 Nov;95(2):413-23. doi: 10.1002/jbm.a.32852.
Implanted polymeric materials, such as medical devices, provoke the body to initiate an inflammatory reaction, known as the foreign body response (FBR), which causes several complications. In this study, polyurethane (Tecoflex®, PU) surface modified with the nonionic surfactant Tween80® (PU/T80) and the cell adhesive PLL-RGD peptide (PU/PLL-RGD) by a previously described entrapment technique were implanted in the peritoneal cavity of Wistar rats for 30 days. Implants were retrieved and examined for tissue reactivity and cellular adherence by various microscopic and analytical techniques. Surface-induced inflammatory response was assessed by real-time PCR based quantification of proinflammatory cytokine transcripts, namely, TNF-α and IL-1β, normalized to housekeeping gene GAPDH. Cellular adherence and their distribution profile were assessed by microscopic examination of H&E stained implant sections. It was observed that PU/PLL-RGD followed by the bare PU surface exhibited severe inflammatory and fibrotic response with an average mean thickness of 19 and 12 μm, respectively, in 30 days. In contrast, PU/T80 surface showed only a cellular monolayer of 2-3 μm in thickness, with a mild inflammatory response and no fibrotic encapsulation. The PU/PLL-RGD peptide-modified substrate promoted an enhanced rate of macrophage cell fusion to form foreign body giant cell (FBGCs), whereas FBGCs were rarely observed on Tween80®-modified substrate. The expression levels of proinflammatory cytokines (TNF-α and IL-1β) were upregulated on PU/PLL-RGD surface followed by bare PU, whereas the cytokine expressions were significantly suppressed on PU/T80 surface. Thus, our study highlights modulation of foreign body response on polyurethane surfaces through surface entrapment technique in the form of differential responses observed on PLL-RGD and Tween80® modified surfaces with the former effective in triggering tissue cell adhesion thereby fibrous encapsulation, while the later being mostly resistant to this phenomenon.
植入的聚合材料,如医疗器械,会引发机体发生炎症反应,即异物反应(FBR),从而导致多种并发症。在这项研究中,采用先前描述的包埋技术,将聚氨基甲酸乙酯(Tecoflex®, PU)表面用非离子表面活性剂 Tween80®(PU/T80)和细胞黏附肽 PLL-RGD(PU/PLL-RGD)进行改性,然后将其植入 Wistar 大鼠的腹腔中 30 天。取出植入物,通过各种显微镜和分析技术检查组织反应和细胞黏附情况。通过实时 PCR 定量检测促炎细胞因子转录物(TNF-α 和 IL-1β),并归一化为管家基因 GAPDH,评估表面诱导的炎症反应。通过对 H&E 染色的植入物切片进行显微镜检查,评估细胞黏附和其分布情况。结果观察到,PU/PLL-RGD 紧随裸 PU 表面,在 30 天内分别表现出严重的炎症和纤维化反应,平均厚度分别为 19μm 和 12μm。相比之下,PU/T80 表面仅显示 2-3μm 厚的单层细胞,炎症反应轻微,无纤维包裹。PU/PLL-RGD 肽修饰的基底促进了巨噬细胞融合形成异物巨细胞(FBGCs)的速率增加,而在 Tween80®修饰的基底上很少观察到 FBGCs。促炎细胞因子(TNF-α 和 IL-1β)的表达水平在 PU/PLL-RGD 表面上调,其次是裸 PU,而在 PU/T80 表面则显著抑制。因此,我们的研究强调了通过表面包埋技术在 PLL-RGD 和 Tween80®修饰表面上观察到的不同反应来调节聚氨酯表面的异物反应,前者有效地触发组织细胞黏附,从而导致纤维包裹,而后者在很大程度上抵抗这种现象。