Option of Bioengineering, California Institute of Technology, Pasadena, California, USA.
J Am Soc Echocardiogr. 2010 Sep;23(9):993-1000. doi: 10.1016/j.echo.2010.06.011. Epub 2010 Aug 8.
Color Doppler jet area (CDJA) is an important measure used to classify mitral regurgitation (MR) severity. The investigators hypothesized that the presence and configuration of multiple regurgitant jets can alter CDJA quantification for fixed regurgitant volumes. This has relevance to MR assessment prior to the treatment of valves with multiple regurgitant orifices or after surgical or percutaneous double-orifice mitral valve repair.
An in vitro model was developed to create jets flowing through a simulated mitral orifice into an imaging chamber. The flow loop was driven with a pulsatile pump at 60 beats/min containing a water-glycerol solution approximating the viscosity of blood. At the orifice, simulated regurgitant stroke volumes of 2.5 to 25 mL were created through plates having either single openings with orifice areas from 0.125 to 0.50 cm(2) or two to four openings with total orifice area of 0.25 cm(2) and varied linear spacing. An 8-MHz transthoracic two-dimensional ultrasound probe was used to acquire jet velocities by continuous-wave Doppler as well as color Doppler for offline analysis. CDJA values were obtained with custom automated pixel-counting software.
Peak jet velocities ranged from 30 to 550 cm/sec. For single jets, normalized average CDJA values increased nonlinearly as a function of average Reynolds number. Peak CDJA values were up to 62% higher for multiple jets compared with single jets with similar total orifice areas and simulated regurgitant stroke volumes. The presence or absence of multiple jets, rather than the total number of jets, appeared to have a greater effect on maximum CDJA. In addition, peak CDJA values for multiple jets increased with increased linear spacing.
A fixed regurgitant volume involving multiple jets will have a larger CDJA value than the same total volume from a single jet. The source of this discrepancy appears to be increased ambient fluid entrainment from adjacent regurgitant jets. This potential overestimation of MR severity using color Doppler flow jets should be taken into consideration when assessing MR prior to treatment or when assessing residual MR after double-orifice mitral valve repair.
彩色多普勒射流区(CDJA)是用于对二尖瓣反流(MR)严重程度进行分类的重要指标。研究人员假设,多个反流射流的存在和形态会改变固定反流量的 CDJA 定量。这对于具有多个反流口的瓣膜治疗前或经皮二尖瓣双孔修复术后的 MR 评估具有相关性。
建立了一个体外模型,以创建通过模拟二尖瓣口流入成像腔的射流。该流路循环由每分钟 60 次搏动的蠕动泵驱动,其中包含近似血液粘度的水-甘油溶液。在瓣口处,通过具有 0.125 至 0.50cm² 的单一开口或具有 0.25cm² 总开口面积和变化线性间距的两个至四个开口的板来创建 2.5 至 25ml 的模拟反流冲程容积。使用 8MHz 经胸二维超声探头通过连续波多普勒和彩色多普勒获取射流速度,以便离线分析。使用自定义自动像素计数软件获得 CDJA 值。
峰值射流速度范围为 30 至 550cm/sec。对于单个射流,归一化平均 CDJA 值随平均雷诺数呈非线性增加。与具有相似总开口面积和模拟反流冲程容积的单个射流相比,多个射流的峰值 CDJA 值最多高 62%。多个射流的存在与否,而不是射流的总数,似乎对最大 CDJA 值的影响更大。此外,随着线性间距的增加,多个射流的峰值 CDJA 值也会增加。
涉及多个射流的固定反流量将比单个射流具有更大的 CDJA 值。这种差异的来源似乎是来自相邻反流射流的更多周围流体夹带。在治疗前评估 MR 或评估二尖瓣双孔修复术后残余 MR 时,应考虑使用彩色多普勒射流高估 MR 严重程度的这种潜在情况。