A ferricyanide-mediated activated sludge bioassay for fast determination of the biochemical oxygen demand of wastewaters.

Activated sludge was successfully incorporated as the biocatalyst in the fast, ferricyanide-mediated biochemical oxygen demand (FM-BOD) bioassay. Sludge preparation procedures were optimized for three potential biocatalysts; aeration basin mixed liquor, aerobic digester sludge and return activated sludge. Following a 24h starving period, the return activated sludge and mixed liquor sludges reported the highest oxidative degradation of a standard glucose/glutamic acid (GGA) mixture and the return activated sludge also recorded the lowest endogenous FM-respiration rate. Dynamic working ranges up to 170 mg BOD(5)L(-1) for OECD standard solutions and 300mg BOD(5)L(-1) for GGA were obtained. This is a considerable improvement upon the BOD(5) standard assay and most other rapid BOD techniques. Time-series ferricyanide-mediated oxidation of the OECD(170) standard approached that of the GGA(198) standard after 3-6h. This is noteworthy given the OECD standard is formulated as a synthetic sewage analogue. A highly significant correlation with the BOD(5) standard method (n=35, p<0.001, R=0.952) was observed for a wide diversity of real wastewater samples. The mean degradation efficiency was indistinguishable from that observed for the BOD(5) assay. These results demonstrate that the activated sludge FM-BOD assay may be used for simple, same-day BOD analysis of wastewaters.