Radial basis network analysis of color parameters to estimate lycopene content on tomato fruits.

With the purpose of estimating the lycopene concentration in tomato food samples, in an non-destructive way, several types of linear models of color parameters have been tested using individual values of L*, a* and b* values, (a*/b*), (a*(2)/b*(2)) and chroma parameters from tomato juice and fresh tomato fruits obtained with two different apparatus (Minolta CR-200b triestimulus colorimeter and HunterLab LabScan XE). Lycopene concentrations of fresh tomato and tomato juice (used as an input) were analyzed by UV-Vis spectroscopy. For all linear methods applied, the best one to estimate the lycopene concentration in tomato was the L*, a* and b* values of tomato juice measured with Hunter colorimeters (adjusted correlation coefficient, R(a)(2)>0.86 and mean prediction error, MPE<6.59%). Four different RBEF models were designed firstly using three color parameters (L*, a* and b*) designated as "Lab case", and secondly individually by the (a*/b*), (a*(2)/b*(2)) and chroma parameters. The lycopene concentration estimations were carried out with the lowest MPE and highest R(a)(2) values possible. In order to test the reliability of the non-linear models, external validation process was also performed. From the testing of the all non-linear models applied, the RBEF Lab case model was the best to estimate lycopene content from color parameters (L*, a* and b*) using Minolta or Hunter equipments (MPE lower than 0.009 and R(a)(2) higher than 0.997). This was a simple non-destructive method for predicting lycopene concentration in tomato fruits and tomato juice, which was reproducible and accurate enough to substitute chemical extraction determinations, and may be a useful tool for tomato industry.