Department of Chemical Engineering and Biotechnology, University of Cambridge, New Museums Site, Pembroke Street, Cambridge CB2 3RA, UK.
J Chromatogr A. 2010 Dec 3;1217(49):7749-58. doi: 10.1016/j.chroma.2010.10.050. Epub 2010 Oct 21.
The ubiquitous use of poly-histidine fusion tags has made the purification of the recombinant target proteins much simpler, although the presence of residual fusion tags can generate immunogenic products or products with changed biological activities. This work presents a generic method of removing poly-histidine fusion tags from recombinant proteins through the use of a hexa-histidine tagged exopeptidase (DAPase) when both tagged species are adsorbed to the immobilized metal affinity chromatography (IMAC) adsorbent. Adsorptive detagging was performed in the presence of 50mM imidazole in order to allow the cleavage reaction by the hexa-histidine tagged DAPase to occur. The progress of batch and adsorptive detagging by DAPase of maltose binding protein (MBP) tagged with two variants of hexa-histidine fusion tag was successfully monitored using cationic exchange chromatography. A single-step, column-based detagging strategy was then optimized to maximize the recovery of native MBP. The kinetics of batch and on-column digestion for both HT6 and HT15 fusion tags were investigated. The process involved the sequential removal of dipeptides during the digestion of full-length fusion protein down to its fully detagged native form. During the course of tag digestion, 4 and 7 different intermediates were detected for HT6 and HT15 tagged MBP respectively. The characteristics of on-column cleavage of poly-histidine fusion tags by DAPase as a function of incubation temperature and amount of protease activity used were examined. It was found that the influence of fusion tag design on the batch and column-based detagging yield and efficiency was substantial. In addition, the structural difference of fusion tags affects the binding strength of the fusion protein, which can influence the resulting product purity. Despite being a longer tag, HT15 fusion tag was the preferred sequence for shortening the time needed for on-column detagging. These results can be applied to the wider use of the proposed platform protocol for the on-column cleavage of poly-histidine tagged proteins using exopeptidases.
多组氨酸融合标签的广泛使用使得重组靶蛋白的纯化变得更加简单,尽管残留的融合标签会产生免疫原性产物或具有改变的生物活性的产物。本工作提出了一种通用的方法,通过使用六组氨酸标记的外肽酶(DAPase)从重组蛋白中去除多组氨酸融合标签,当标记的两种物质都被吸附到固定化金属亲和层析(IMAC)吸附剂上时。为了允许六组氨酸标记的 DAPase 发生切割反应,在存在 50mM 咪唑的情况下进行吸附脱标签。使用阳离子交换色谱成功监测了麦芽糖结合蛋白(MBP)与两种六组氨酸融合标签变体标记的批处理和吸附脱标签的进展。然后优化了基于柱的单步脱标签策略,以最大化回收天然 MBP。研究了 HT6 和 HT15 融合标签的批处理和柱上消化动力学。该过程涉及在消化全长融合蛋白至其完全脱标签的天然形式时,依次去除二肽。在标签消化过程中,分别检测到 HT6 和 HT15 标记的 MBP 有 4 和 7 种不同的中间体。研究了 DAPase 作为孵育温度和蛋白酶活性用量的函数对多组氨酸融合标签在柱上切割的影响。结果发现,融合标签设计对批处理和柱上脱标签产率和效率的影响是实质性的。此外,融合标签的结构差异会影响融合蛋白的结合强度,从而影响最终产物的纯度。尽管 HT15 融合标签较长,但它是缩短柱上脱标签所需时间的首选序列。这些结果可应用于更广泛地使用拟议的基于柱的外肽酶切割多组氨酸标记蛋白的平台方案。