Nakajima T, Tonna G, Rao R, Boi P, Kaufman Y, Holben B
Appl Opt. 1996 May 20;35(15):2672-86. doi: 10.1364/AO.35.002672.
The software code SKYEAD.pack for retrieval of aerosol size distribution and optical thickness from data of direct and diffuse solar radiation is described; measurements are carried out with sky radiometers in the wavelength range 0.369-1.048 µm. The treatment of the radiative transfer problem concerning the optical quantities is mainly based on the IMS (improved multiple and single scattering) method, which uses the delta-M approximation for the truncation of the aerosol phase function and corrects the solution for the first- and second-order scattering. Both linear and nonlinear inversion methods can be used for retrieving the size distribution. Improved calibration methods for both direct and diffuse radiation, the data-analysis procedure, the results from the proposed code, and several connected problems are discussed. The results can be summarized as follows: (a) the SKYRAD.pack code can retrieve the columnar aerosol features with accuracy and efficiency in several environmental situations, provided the input parameters are correctly given; (b) when data of both direct and diffuse solar radiation are used, the detectable radius interval for aerosol particles is approximately from 0.03 to 10 µm; (c) besides the retrieval of the aerosol features, the data-analysis procedure also permits the determination of average values for three input parameters (real and imaginary aerosol refractive index, ground albedo) from the optical data; (d) absolute calibrations for the sky radiometer are not needed, and calibrations for direct and diffuse radiation can be carried out with field data; (e) the nonlinear inversion gives satisfactory results in a larger radius interval, without the unrealistic humps that occur with the linear inversion, but the results strongly depend on the first-guess spectrum; (f) aerosol features retrieved from simulated data showed a better agreement with the given data for the linear inversion than for the nonlinear inversion.
介绍了用于从太阳直接辐射和漫射辐射数据中反演气溶胶粒径分布和光学厚度的软件代码SKYEAD.pack;测量是使用天空辐射计在0.369 - 1.048 µm波长范围内进行的。关于光学量的辐射传输问题的处理主要基于IMS(改进的多次和单次散射)方法,该方法使用δ-M近似来截断气溶胶相函数,并对一阶和二阶散射的解进行修正。线性和非线性反演方法均可用于反演粒径分布。讨论了针对直接辐射和漫射辐射的改进校准方法、数据分析程序、所提出代码的结果以及几个相关问题。结果可总结如下:(a) 只要正确给出输入参数,SKYRAD.pack代码能够在多种环境情况下准确且高效地反演柱状气溶胶特征;(b) 当使用太阳直接辐射和漫射辐射的数据时,气溶胶粒子的可探测半径区间约为0.03至10 µm;(c) 除了反演气溶胶特征外,数据分析程序还允许从光学数据中确定三个输入参数(气溶胶实折射率和虚折射率、地面反照率)的平均值;(d) 无需对天空辐射计进行绝对校准,可使用现场数据对直接辐射和漫射辐射进行校准;(e) 非线性反演在较大半径区间给出令人满意的结果,不会出现线性反演中出现的不切实际的峰,但结果强烈依赖于初始猜测谱;(f) 从模拟数据反演得到的气溶胶特征,线性反演的结果与给定数据的一致性比非线性反演更好。