Suppr超能文献

在离子液体中催化纤维素转化为化学品。

Catalytic conversion of cellulose to chemicals in ionic liquid.

机构信息

State Key Laboratory for Oxo Synthesis and Selective Oxidation, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, PR China.

出版信息

Carbohydr Res. 2011 Jan 3;346(1):58-63. doi: 10.1016/j.carres.2010.10.022. Epub 2010 Oct 31.

Abstract

A simple and effective route for the production of 5-hydroxymethyl furfural (HMF) and furfural from microcrystalline cellulose (MCC) has been developed. CoSO(4) in an ionic liquid, 1-(4-sulfonic acid) butyl-3-methylimidazolium hydrogen sulfate (IL-1), was found to be an efficient catalyst for the hydrolysis of cellulose at 150°C, which led to 84% conversion of MCC after 300min reaction time. In the presence of a catalytic amount of CoSO(4), the yields of HMF and furfural were up to 24% and 17%, respectively; a small amount of levulinic acid (LA) and reducing sugars (8% and 4%, respectively) were also generated. Dimers of furan compounds were detected as the main by-products through HPLC-MS, and with the help of mass spectrometric analysis, the components of gas products were methane, ethane, CO, CO(2,) and H(2). A mechanism for the CoSO(4)-IL-1 hydrolysis system was proposed and IL-1 was recycled for the first time, which exhibited favorable catalytic activity over five repeated runs. This catalytic system may be valuable to facilitate energy-efficient and cost-effective conversion of biomass into biofuels and platform chemicals.

摘要

已开发出一种从微晶纤维素 (MCC) 生产 5-羟甲基糠醛 (HMF) 和糠醛的简单有效的方法。在 150°C 下,CoSO(4)在离子液体 1-(4-磺酸)丁基-3-甲基咪唑硫酸氢盐 (IL-1) 中被发现是纤维素水解的有效催化剂,反应 300 分钟后 MCC 的转化率达到 84%。在少量 CoSO(4)的存在下,HMF 和糠醛的收率分别达到 24%和 17%;还生成了少量的乙酰丙酸 (LA) 和还原糖(分别为 8%和 4%)。通过 HPLC-MS 检测到呋喃化合物的二聚体作为主要副产物,通过质谱分析,气体产物的成分有甲烷、乙烷、CO、CO(2)和 H(2)。提出了 CoSO(4)-IL-1 水解体系的机理,并首次回收了 IL-1,在五次重复运行中表现出良好的催化活性。该催化体系可能有助于实现从生物质到生物燃料和平台化学品的节能且具有成本效益的转化。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验