Department of Environmental Engineering/National Center of Excellence for Environmental and Hazardous Waste Management, Faculty of Engineering, Kasetsart University, Bangkok, Thailand.
Bioresour Technol. 2011 May;102(9):5438-43. doi: 10.1016/j.biortech.2010.12.042. Epub 2010 Dec 15.
Floating plastic media pre-filter (PP) in combination with microfiltration membrane (MF) was applied to the removal of water-borne microorganism from surface water. The system was operated with and without coagulant addition. Jar-test results suggested that alum and polyaluminum chloride could effectively remove turbidity, fecal coliforms (FC) and algae at their optimum doses. Nevertheless, none of those coagulants could accomplish high coliphage (CP) removal. Microorganism removal in the system was increasing along with time in the PP unit operated at 5-m(3)/m(2)/h filtration rate but opposite trend was observed at higher filtration rates (10-15m(3)/m(2)/h). Different coagulant types and filtration rates employed in the PP unit also affected microorganism removal in MF unit. The operation of PP unit at a filtration rate of 15m(3)/m(2)/h and MF unit at a filtration rate of 0.6m(3)/m(2)/d could achieve satisfactory turbidity and overall microorganism removal.
漂浮的塑料介质预滤器(PP)与微滤膜(MF)结合,用于去除地表水中的水传播微生物。该系统在添加和不添加凝结剂的情况下运行。瓶试验结果表明,明矾和聚合氯化铝可以在最佳剂量下有效去除浊度、粪大肠菌群(FC)和藻类。然而,这些凝结剂都无法完成高噬菌体(CP)的去除。在以 5m³/m²/h 的过滤速率运行的 PP 单元中,随着时间的推移,微生物的去除率不断增加,但在较高的过滤速率(10-15m³/m²/h)下则观察到相反的趋势。PP 单元中使用的不同凝结剂类型和过滤速率也会影响 MF 单元中的微生物去除率。PP 单元以 15m³/m²/h 的过滤速率运行,MF 单元以 0.6m³/m²/d 的过滤速率运行,可以实现令人满意的浊度和总体微生物去除率。