Suppr超能文献

足矫形器的轮廓和硬度对感知舒适度的评分的影响。

Influence of contouring and hardness of foot orthoses on ratings of perceived comfort.

机构信息

School of Health and Rehabilitation Sciences, University of Queensland, Brisbane, Australia.

出版信息

Med Sci Sports Exerc. 2011 Aug;43(8):1507-12. doi: 10.1249/MSS.0b013e31820e783f.

Abstract

PURPOSE

Comfort is a vital component of orthosis therapy. The purpose of this study was to examine what features of orthoses (design or hardness) influence the perception of comfort by using previously established footwear comfort measures: 100-mm visual analog scale (VAS) and ranking scale.

METHODS

Twenty subjects were consecutively allocated to two experiments consisting of five sessions of repeated measures. Comfort measures were taken from four prefabricated orthosis in each session using the VAS (experiment 1) and ranking scale (experiment 2). Subjects in experiment 1 were also asked to rate each orthosis relative to their shoe using a criterion scale. Measures were taken in both walking and jogging.

RESULTS

A soft-flat orthosis was found to be significantly more comfortable than all contoured orthoses, including one of the same hardness using both the VAS and ranking scale. Using the VAS, differences between the soft-flat and contoured orthoses were also found to be clinically meaningful for dimensions of overall comfort and arch cushioning (>10.2 mm). Perceived comfort of orthoses significantly differed between walking and jogging on the VAS but was not clinically meaningful. Comparisons between the VAS and criterion scale detected a VAS difference of 11.34 mm between orthoses judged as comfortable as my shoe and slightly more comfortable than my shoe. There was a VAS difference of 17.49 mm between orthoses judged as comfortable as my shoe and slightly less comfortable than my shoe.

CONCLUSIONS

Healthy subjects prioritize contouring over hardness when judging the comfort of orthoses. Clinically meaningful changes were required to change or enhance the comfort of orthoses standardized in material type and fabrication.

摘要

目的

舒适是矫形器治疗的一个重要组成部分。本研究的目的是通过使用先前建立的鞋类舒适度测量方法:100 毫米视觉模拟量表(VAS)和等级量表,来研究矫形器的哪些特征(设计或硬度)会影响舒适度的感知。

方法

20 名受试者连续分配到两个实验中,每个实验包括五个重复测量的会话。在每个会话中,使用 VAS(实验 1)和等级量表(实验 2)从四个预制矫形器中获取舒适度测量值。实验 1 的受试者还被要求使用标准量表对每个矫形器相对于他们的鞋子进行评分。在行走和慢跑两种状态下都进行了测量。

结果

软平底矫形器被发现比所有有轮廓的矫形器都更舒适,包括使用 VAS 和等级量表的一种硬度相同的矫形器。使用 VAS,软平底和有轮廓的矫形器之间的差异在整体舒适度和足弓衬垫方面也具有临床意义(>10.2 毫米)。VAS 上矫形器的舒适度在行走和慢跑之间存在显著差异,但没有临床意义。VAS 与标准量表之间的比较检测到,被判断为与我的鞋子一样舒适和稍微比我的鞋子更舒适的矫形器之间存在 11.34 毫米的 VAS 差异。被判断为与我的鞋子一样舒适和稍微比我的鞋子更舒适的矫形器之间存在 17.49 毫米的 VAS 差异。

结论

健康受试者在判断矫形器的舒适度时优先考虑轮廓而不是硬度。需要有临床意义的变化才能改变或增强标准化在材料类型和制造方面的矫形器的舒适度。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验