Department of Chemistry, Faculty of Science, Karadeniz Technical University, 61080 Trabzon, Turkey.
J Hazard Mater. 2011 Mar 15;187(1-3):199-205. doi: 10.1016/j.jhazmat.2011.01.020. Epub 2011 Jan 12.
This study concentrated on the direct immobilization of anatase nano titanium dioxide particles (TiO(2), 10nm particle size) into or onto a biodegradable polymer, polycaprolactone, by solvent-cast processes. The self-cleaning, namely photocatalytic properties of the produced materials were tested by photocatalytic removal of methylene blue as model compound and antimicrobial properties were investigated using Candida albicans as model microorganism. Produced TiO(2) immobilized polymer successfully removed methylene blue (MB, 1 × 10(-5)M) from aqueous solution without additional pH arrangement employing a UV-A light (365 nm) source. Almost 83.2% of dye was removed or decomposed by 5 wt% TiO(2) immobilized into PCL (0.08 g) and removal percentage reached to 94.2% with 5 wt% TiO(2) immobilized onto PCL after a 150 min exposure period. Although removal percentage decrease with increased ionic strength and usage of a visible light source, produced materials were still effective. TiO(2) immobilized onto PCL (5 wt%) was quite effective killing almost 54% of C. albicans (2 × 10(6)CFU/mL) after only 60 min exposure with a near visible light source. Control experiments employing PCL alone in the presence and absence of light were ineffective under the same condition.
本研究集中于通过溶剂浇铸工艺将锐钛矿纳米二氧化钛颗粒(TiO(2),粒径 10nm)直接固定在可生物降解聚合物聚己内酯中。通过光催化去除亚甲基蓝作为模型化合物测试了所制备材料的自清洁即光催化性能,并且使用白色念珠菌作为模型微生物研究了抗菌性能。所制备的 TiO(2)固定化聚合物在不进行额外 pH 调节的情况下,成功地从水溶液中去除亚甲基蓝(MB,1 × 10(-5)M),采用 UV-A 光(365nm)源。在 5wt%TiO(2)固定到 PCL(0.08g)中时,约有 83.2%的染料被去除或分解,在 150min 暴露后,当 5wt%TiO(2)固定到 PCL 上时,去除率达到 94.2%。尽管去除率随离子强度的增加和可见光源的使用而降低,但所制备的材料仍然有效。TiO(2)固定到 PCL(5wt%)上在近可见光源下仅暴露 60min 后对白色念珠菌(2×10(6)CFU/mL)的杀灭率相当高,接近 54%。在相同条件下,单独使用 PCL 进行的对照实验在有光和无光的情况下均无效。