Department of Microbial Ecology, Netherlands Institute of Ecology (NIOO-KNAW), Rijksstraatweg 6, 3631 AC Nieuwersluis, The Netherlands.
Cytometry A. 2010 Oct;77(10):911-24. doi: 10.1002/cyto.a.20946.
Heterogeneity within natural phytoplankton communities makes it very difficult to analyze parameters at the single-cell level. Flow cytometric sorting is therefore a useful tool in aquatic sciences, as it provides material for post-sort analysis and culturing. Sorting subpopulations from natural communities, however, often requires handling morphologically diverse and complex particles with various abundances. Long particles, such as filament-forming cyanobacteria (>100-μm long), prove very difficult to handle. These potentially toxic organisms are widespread in eutrophic systems and have important ecological consequences. Being able to sort filamentous cyanobacteria efficiently and as viable cells is therefore highly desirable when studying factors associated with their toxicity and occurrence. This unconventional sorting requires extensive user experience and special instrument setup. We have investigated the effect of hydrodynamic and electromechanical components of a flow cytometer, and sorting protocol on the quantitative sorting efficiency of these long particles using two filamentous cyanobacterial strains with average lengths of ∼100 and ∼300 μm. Sorting efficiency ranged from 9.4 to 96.0% and was significantly affected by filament length, sorting envelope, drop delay (dd), and for the long species also by tip size, but not by cycle time. Filaments survived sorting and were not damaged. The optimal settings found for the modular MoFlo® cell-sorter to sort the filaments were a 100-μm flow tip at 30 psi (207 kPa) with a three-droplet envelope in Enrich mode while using an extended analysis time of 17.6 μs and an intermediate plate charge and deflection percentage combination of 3,000 V/60%, combined with a dd 0 for the cultures with 100-μm filaments and dd +1 for the culture with 300-μm filaments. To the best of our knowledge, the filaments up to 1063.5 μm sorted in this study are the longest ever sorted.
天然浮游植物群落内部的异质性使得很难分析单细胞水平的参数。因此,流式细胞术分选是水生科学中非常有用的工具,因为它提供了分选后分析和培养的材料。然而,从天然群落中分选亚群通常需要处理形态多样且复杂、丰度不同的颗粒。长颗粒,如丝状蓝藻(长> 100μm),则非常难以处理。这些潜在的有毒生物在富营养化系统中广泛存在,具有重要的生态后果。因此,在研究与丝状蓝藻毒性和出现相关的因素时,高效地分选并保持丝状蓝藻作为活细胞是非常理想的。这种非常规的分选需要丰富的用户经验和特殊的仪器设置。我们研究了流式细胞仪的流体力学和机电组件以及分选方案对两种平均长度分别约为 100μm 和 300μm 的丝状蓝藻的定量分选效率的影响。分选效率范围为 9.4%至 96.0%,且显著受丝状藻长度、分选包络、液滴延迟(dd)的影响,对于长物种还受尖端尺寸的影响,但不受循环时间的影响。分选后丝状藻存活且未受损。为了对丝状藻进行分选,我们在模块化的 MoFlo®细胞分选仪上找到了最佳的设置,即使用 30psi(207kPa)的 100μm 流路尖端,在富集模式下使用三液滴包络,同时使用 17.6μs 的扩展分析时间和中等的板电荷和偏转百分比组合(3000V/60%),结合对于 100μm 丝状藻使用 dd0,对于 300μm 丝状藻使用 dd+1。据我们所知,在这项研究中,我们分选的最长丝状藻达到了 1063.5μm。