Lee Chia-Hua, Bose Suman, Van Vliet Krystyn J, Karp Jeffrey M, Karnik Rohit
Department of Materials Science and Engineering, MIT-Massachusetts Institute of Technology, USA.
J Vis Exp. 2011 Feb 13(48):2640. doi: 10.3791/2640.
Lateral displacement of cells orthogonal to a flow stream by rolling on asymmetric receptor patterns presents an opportunity for development of new devices for label-free separation and analysis of cells. Such devices may use lateral displacement for continuous-flow separation, or receptor patterns that modulate adhesion to distinguish between different cell phenotypes or levels of receptor expression. Understanding the nature of cell rolling trajectories on receptor-patterned substrates is necessary for engineering of the substrates and design of such devices. Here, we demonstrate a protocol for studying cell rolling trajectories on asymmetric receptor patterns that support cell rolling adhesion. Well-defined, μm-scale patterns of P-selectin receptors were fabricated using microcontact printing on gold-coated slides that were incorporated in a flow chamber. HL60 cells expressing the PSGL-1 ligand were flowed across a field of patterned lines and visualized on an inverted bright field microscope. The cells rolled and tracked along the inclined edges of the patterns, resulting in lateral deflection. Each cell typically rolled for a certain distance along the pattern edges (defined as the edge tracking length), detached from the edge, and reattached to a downstream pattern. Although this detachment makes it difficult to track the entire trajectory of a cell from entrance to exit in the flow chamber, particle-tracking software was used to analyze and yield the rolling trajectories of the cells during the time when they were moving on a single receptor-patterned line. The trajectories were then examined to obtain distributions of cell rolling velocities and the edge tracking lengths for each cell for different patterns. This protocol is useful for quantifying cell rolling trajectories on receptor patterns and relating these to engineering parameters such as pattern angle and shear stress. Such data will be useful for design of microfluidic devices for label-free cell separation and analysis.
细胞通过在不对称受体模式上滚动而发生与流动方向正交的横向位移,这为开发用于细胞无标记分离和分析的新设备提供了契机。此类设备可利用横向位移进行连续流分离,或利用调节黏附的受体模式来区分不同的细胞表型或受体表达水平。了解细胞在受体图案化底物上滚动轨迹的本质对于此类底物的工程设计和设备设计至关重要。在此,我们展示了一种用于研究细胞在支持细胞滚动黏附的不对称受体模式上滚动轨迹的方案。使用微接触印刷技术在金涂层载玻片上制备了明确的、微米级的P-选择素受体图案,并将其置于流动室中。表达PSGL-1配体的HL60细胞流过图案化线条区域,并在倒置明场显微镜下观察。细胞沿着图案的倾斜边缘滚动并追踪,从而导致横向偏转。每个细胞通常沿着图案边缘滚动一定距离(定义为边缘追踪长度),从边缘脱离,然后重新附着到下游图案上。尽管这种脱离使得难以追踪细胞在流动室中从入口到出口的整个轨迹,但利用粒子追踪软件对细胞在单个受体图案化线条上移动期间的滚动轨迹进行了分析。然后检查这些轨迹,以获得不同图案下每个细胞的滚动速度分布和边缘追踪长度。该方案有助于量化细胞在受体图案上的滚动轨迹,并将这些轨迹与诸如图案角度和剪切应力等工程参数相关联。此类数据将有助于设计用于细胞无标记分离和分析的微流控设备。