Rathleff Michael Skovdal, Moelgaard Carsten, Lykkegaard Olesen Jens
Orthopaedic Division, North Denmark Region, Aalborg Hospital-Aarhus University Hospital, Aalborg, Denmark.
J Clin Ultrasound. 2011 Mar-Apr;39(3):128-34. doi: 10.1002/jcu.20787. Epub 2011 Jan 10.
To determine intra- and interobserver reliability and measurement precision of sonographic assessment of plantar fascia thickness when using one, the mean of two, or the mean of three measurements.
Two experienced observers scanned 20 healthy subjects twice with 60 minutes between test and retest. A GE LOGIQe ultrasound scanner was used in the study. The built-in software in the scanner was used to measure the thickness of the plantar fascia (PF). Reliability was calculated using intraclass correlation coefficient (ICC) and limits of agreement (LOA).
Intraobserver reliability (ICC) using one measurement was 0.50 for one observer and 0.52 for the other, and using the mean of three measurements intraobserver reliability increased up to 0.77 and 0.67, respectively. Interobserver reliability (ICC) when using one measurement was 0.62 and increased to 0.82 when using the average of three measurements. LOA showed that when using the average of three measurements, LOA decreased to 0.6 mm, corresponding to 17.5% of the mean thickness of the PF.
The results showed that reliability increases when using the mean of three measurements compared with one. Limits of agreement based on intratester reliability shows that changes in thickness that are larger than 0.6 mm can be considered actual changes in thickness and not a result of measurement error.
确定在使用单次测量值、两次测量值的平均值或三次测量值的平均值时,超声评估足底筋膜厚度的观察者内和观察者间可靠性以及测量精度。
两名经验丰富的观察者对20名健康受试者进行了两次扫描,测试和复测之间间隔60分钟。研究中使用了一台GE LOGIQe超声扫描仪。利用扫描仪的内置软件测量足底筋膜(PF)的厚度。使用组内相关系数(ICC)和一致性界限(LOA)计算可靠性。
一名观察者使用单次测量的观察者内可靠性(ICC)为0.50,另一名观察者为0.52,而使用三次测量值的平均值时,观察者内可靠性分别提高到0.77和0.67。使用单次测量时观察者间可靠性(ICC)为0.62,使用三次测量的平均值时提高到0.82。一致性界限表明,使用三次测量的平均值时,一致性界限降至0.6mm,相当于足底筋膜平均厚度的17.5%。
结果表明,与单次测量相比,使用三次测量的平均值时可靠性提高。基于测试者内可靠性的一致性界限表明,厚度变化大于0.6mm可被视为厚度的实际变化,而非测量误差的结果。