Institute for Biological Sciences, National Research Council of Canada, M54, Ottawa, ON, K1A 0R6, Canada.
J Biomed Mater Res B Appl Biomater. 2011 May;97(2):201-14. doi: 10.1002/jbm.b.31774. Epub 2011 Mar 9.
Bioengineering approaches have been intensively applied to create small diameter vascular grafts using artificial materials. However, a fully successful, high performing and anti-thrombogenic structure has not been achieved yet. In this study, we have designed and fabricated a novel non-woven fibrous vascular graft with biomechanical properties closely resembling those of native vessels. Vascular cell growth, preservation of cell phenotype, retention of vasoactive properties, as well as the effect of gelatin coating on the cellular interaction with the scaffolds under static and shear stress conditions were investigated. The non-woven fibrous scaffolds were made from melt blown polyethylene terephthalate fiber webs stacked by means of a consolidation technique. The scaffold variables were fiber diameter distribution and the number of consolidated web stacks. SEM analysis confirmed various fiber diameter and pore size ranges corresponding to the different conditions. The scaffolds showed burst pressure values of ∼1500 mmHg and compliance (8.4 ± 1.0 × 10(-2) % mmHg(-1) ) very similar to those of native arteries (∼8 × 10(-2) % mmHg(-1) ). The structure with the smallest fiber diameter range (1-5 μm) and pore size range (1-20 μm) was the most suitable for the growth of human brain endothelial cells and aortic smooth muscle cells. The cells maintained their specific cell phenotype, expressed collagen and elastin and produced cAMP in response to α-calcitonin gene-related peptide. However, under shear stress conditions (0.9 dyne cm(-2) ), only 30% of the cells were retained in both uncoated and gelatin-coated scaffolds indicating the need for improving the cell retention capacity of these structures, which is our future research direction. This study indicates that the biomechanical and biocompatible properties of this novel vascular scaffold are promising for the development of a vascular graft with similar characteristics to those of native vessels.
生物工程方法已被广泛应用于使用人工材料来制造小直径血管移植物。然而,尚未实现完全成功、高性能和抗血栓形成的结构。在这项研究中,我们设计并制造了一种具有与天然血管非常相似的生物力学特性的新型无纺纤维血管移植物。研究了血管细胞生长、细胞表型的保持、血管活性物质的保留,以及明胶涂层在静态和切应力条件下对细胞与支架相互作用的影响。无纺纤维支架由通过固结技术堆叠的熔喷聚对苯二甲酸乙二醇酯纤维网制成。支架的变量是纤维直径分布和固结的纤维网叠层数。SEM 分析证实了不同条件下的各种纤维直径和孔径范围。支架的爆裂压力值约为 1500mmHg,顺应性(8.4±1.0×10(-2) %mmHg(-1))与天然动脉非常相似(约 8×10(-2) %mmHg(-1))。具有最小纤维直径范围(1-5μm)和孔径范围(1-20μm)的结构最适合人脑血管内皮细胞和主动脉平滑肌细胞的生长。细胞保持其特定的细胞表型,表达胶原蛋白和弹性蛋白,并对α-降钙素基因相关肽产生 cAMP。然而,在切应力条件(0.9 达因/cm(-2))下,只有 30%的细胞保留在未涂层和明胶涂层的支架中,这表明需要提高这些结构的细胞保留能力,这是我们未来的研究方向。本研究表明,这种新型血管支架的生物力学和生物相容性特性有望开发出具有与天然血管相似特性的血管移植物。