School of Environmental Science and Public Health, Wenzhou Medical College, Wenzhou, P R China.
J Sep Sci. 2011 May;34(9):1084-90. doi: 10.1002/jssc.201000767. Epub 2011 Mar 10.
An effective multi-residue pretreatment technique, solid-phase extraction (SPE) combined with dispersive liquid-liquid microextraction (DLLME), was proposed for the trace analysis of 14 polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) in milk samples using gas chromatography-mass spectrometry (GC-MS). Interesting analytes in milk samples were extracted with hexane after protein precipitation. The hexane extracts were loaded on an LC-Florisil column to isolate analytes from the milk matrix. The elutes were dried and dissolved in acetone, which was used as the disperser solvent in subsequent DLLME procedures. The effects of several important parameters on the extraction efficiency were evaluated. Under the optimized conditions, a linear relationship was obtained in the range of 0.02-10.00 μg/L (PCBs) and 0.5-100.00 μg/L (PBDEs). The LOD (S/N=3) and relative standard deviations (RSDs, n=5) for all analytes were 0.01-0.4 μg/L and 0.6-8.5%, respectively. The recoveries of the standards added to raw bovine milk samples were 74.0-131.8%, and the repeatabilities of the analysis results were 1.12-17.41%. This method has been successfully applied to estimating PCBs and PBDEs in milk samples.
一种有效的多残留预处理技术,固相萃取(SPE)与分散液液微萃取(DLLME)相结合,用于使用气相色谱-质谱法(GC-MS)对牛奶样品中的 14 种多氯联苯(PCBs)和多溴二苯醚(PBDEs)进行痕量分析。有趣的是,牛奶样品中的分析物在蛋白质沉淀后用己烷提取。己烷提取物加载到 LC-Florisil 柱上,从牛奶基质中分离分析物。洗脱液干燥并溶解在丙酮中,丙酮在随后的 DLLME 步骤中用作分散溶剂。评估了几个重要参数对萃取效率的影响。在优化条件下,在 0.02-10.00μg/L(PCBs)和 0.5-100.00μg/L(PBDEs)范围内获得线性关系。所有分析物的检出限(S/N=3)和相对标准偏差(RSD,n=5)分别为 0.01-0.4μg/L 和 0.6-8.5%。添加到原始牛奶样品中的标准品的回收率为 74.0-131.8%,分析结果的重复性为 1.12-17.41%。该方法已成功应用于估计牛奶样品中的 PCBs 和 PBDEs。