Cui Guanyu, Watanabe Kota, Hosogane Naobumi, Tsuji Takashi, Ishii Ken, Nakamura Masaya, Toyama Yoshiaki, Chiba Kazuhiro, Lenke Lawrence G, Matsumoto Morio
Department of Orthopedic Surgery, Keio University School of Medicine, 35 Shinanomachi, Shinjuku, Tokyo, 160-8582, Japan.
Surg Radiol Anat. 2012 Apr;34(3):209-16. doi: 10.1007/s00276-011-0849-z. Epub 2011 Jul 8.
To evaluate the morphologic characteristics of the thoracic pedicle with regard to safe free-hand thoracic pedicle screw placement, based on multi-planar reconstruction CT images.
Thirty adolescent idiopathic scoliosis (AIS) patients who had undergone posterior corrective surgery for major thoracic curve were included in this study. Reconstructed CT axial images at each thoracic vertebra were used to measure: (1) the shortest distance from an entry point to the ventral cortex of the lamina (critical distance), and (2) the distance from the entry point to the tangent of the spinal canal at the medial wall of the pedicle (safe distance). The critical length was defined as the distance between the critical distance and the safe distance. The distance from the entry point to the medial wall breach site (breach distance) was measured on post-operative CT images.
The mean critical distance was 9.3 ± 1.1 mm. The critical distance of vertebrae from different levels was relatively constant, between 8.1 and 10.1 mm. The mean safe distance was 15.2 ± 1.3 mm. The safe distance of vertebrae from different levels was also relatively constant, between 14.5 and 16 mm. The mean critical length was 5.9 ± 1.0 mm. The critical length of vertebrae between T3 and T12 was relatively constant, ranging from 5 to 6.5 mm. The mean breach distance was 12.3 ± 1.3 mm and the each breach always recognized between the critical distance and the safe distance.
The risk of pedicle medial wall perforation increases as the pedicle probe advances beyond the critical distance of 8-10 mm from the entry point, while it decreases entering into the safe distance at 14.5-16 mm. These parameters were relatively constant even in the most rotated vertebrae at T9 or those with the narrowest pedicle at T7 or T4.
基于多平面重建CT图像,评估胸椎椎弓根的形态特征,以确定徒手置入胸椎椎弓根螺钉的安全性。
本研究纳入30例接受过胸椎主弯后路矫正手术的青少年特发性脊柱侧凸(AIS)患者。利用每个胸椎的重建CT轴位图像测量:(1)进针点至椎板腹侧皮质的最短距离(关键距离),以及(2)进针点至椎弓根内侧壁椎管切线的距离(安全距离)。关键长度定义为关键距离与安全距离之间的距离。在术后CT图像上测量进针点至内侧壁穿破部位的距离(穿破距离)。
平均关键距离为9.3±1.1mm。不同节段椎体的关键距离相对恒定,在8.1至10.1mm之间。平均安全距离为15.2±1.3mm。不同节段椎体的安全距离也相对恒定,在14.5至16mm之间。平均关键长度为5.9±1.0mm。T3至T12椎体之间的关键长度相对恒定,范围为5至6.5mm。平均穿破距离为12.3±1.3mm,每次穿破均发生在关键距离与安全距离之间。
当椎弓根探子从进针点推进超过8 - 10mm的关键距离时,椎弓根内侧壁穿孔风险增加,而进入14.5 - 16mm的安全距离时风险降低。即使在T9旋转最严重的椎体或T7或T4椎弓根最窄的椎体中,这些参数也相对恒定。