In vitro comparison of stiffness of plate fixation of radii from large- and small-breed dogs.

OBJECTIVE

To compare in vitro axial compression, abaxial compression, and torsional stiffnesses of intact and plated radii from small- and large-breed dogs.

SAMPLE

Radii from 18 small-breed and 9 large-breed skeletally mature dogs.

PROCEDURES

3 groups were tested: large-breed dog radii plated with 3.5-mm limited-contact dynamic compression plates (LCDCPs), small-breed dog radii plated with 2.0-mm dynamic compression plates (DCPs), and small-breed dog radii plated with 2.0/2.7-mm cut-to-length plates (CTLPs). The axial compression, abaxial compression, and torsional stiffnesses of each intact radius were determined under loading with a material testing machine. An osteotomy was performed, radii were plated, and testing was repeated. The stiffness values of the plated radii were expressed as absolute and normalized values; the latter was calculated as a percentage of the stiffness of the intact bone. Absolute and normalized stiffness values were compared among groups.

RESULTS

The absolute stiffnesses of plated radii in axial and abaxial compression were 52% to 83% of the intact stiffnesses in all fixation groups. No difference was found in torsion. There was no difference in normalized stiffnesses between small-breed radii stabilized with CTLPs and large-breed radii stabilized with LCDCPs; however, small-breed radii stabilized with DCPs were less stiff than were any other group.

CONCLUSIONS AND CLINICAL RELEVANCE

Plated radii of small-breed dogs had normalized stiffnesses equal to or less than plated radii of large-breed dogs. The complications typically associated with plating of radial fractures in small-breed dogs cannot be ascribed to an overly stiff bone-plate construct.