Suppr超能文献

考察不同类型增塑剂对青稞壳多糖成膜溶液及其可食性膜流变性和结构特性的影响

Rheological and structural characterisation of film-forming solutions and biodegradable edible film made from kefiran as affected by various plasticizer types.

机构信息

Department of Food Science, Engineering and Technology, Faculty of Agricultural Engineering and Technology, University of Tehran, Karaj, Iran.

出版信息

Int J Biol Macromol. 2011 Nov 1;49(4):814-21. doi: 10.1016/j.ijbiomac.2011.07.018. Epub 2011 Jul 30.

Abstract

The rheological properties of kefiran film-forming solutions, as well as the structural characterisation of the resulting films, were investigated as a function of various plasticizer types. The behaviours of the storage (G') and loss (G″) moduli as a function of frequency were typical of gel-like material, with the G' higher than the G″. Kefiran-based films, which may find application as edible films, were prepared by a casting and solvent-evaporation method. Possible interaction between the adjacent chains in the kefiran polymer and various plasticizers was proven by Fourier-transform infrared spectroscopy (FT-IR). The crystallinity of plasticized kefiran film was also analysed using X-ray diffraction (XRD); this revealed an amorphous-crystalline structure. These results were explained by the film's microstructure, which was analysed by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The present study has helped determine possible interactions of kefiran, plasticizer and water molecules in determining film properties.

摘要

本文研究了不同类型增塑剂对结冷胶成膜溶液流变性以及所得膜结构特性的影响。储能模量 (G') 和损耗模量 (G″) 随频率的变化行为是典型的凝胶状材料,G'高于 G″。通过浇铸和溶剂蒸发法制备了可能用作可食用膜的结冷胶基膜。傅里叶变换红外光谱 (FT-IR) 证明了相邻结冷胶聚合物链与各种增塑剂之间可能存在相互作用。利用 X 射线衍射 (XRD) 分析了增塑结冷胶膜的结晶度,结果显示其具有无定形-结晶结构。这些结果可以通过原子力显微镜 (AFM) 和扫描电子显微镜 (SEM) 分析的膜微观结构来解释。本研究有助于确定结冷胶、增塑剂和水分子之间的相互作用对薄膜性能的影响。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验