Huang Jia-Qi, Zhang Qiang, Xu Guang-Hui, Qian Wei-Zhong, Wei Fei
Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084, People's Republic of China.
Nanotechnology. 2008 Oct 29;19(43):435602. doi: 10.1088/0957-4484/19/43/435602. Epub 2008 Sep 22.
In this paper, hydrophobic carbon nanotube (CNT) arrays, ropes, and agglomerates were synthesized through self-organization on quartz substrates with different micro-structures under the same growth condition. On a flat substrate, a uniform woven structure was formed which resulted in a synchronous growth into an array. When the substrate with 10 µm round concaves distributed on the surface was adopted, the woven structure was sporadic and a CNT cluster was grown in the concave. With further growth, CNT ropes were self-organized. Subsequently, when the substrate consisting of irregular ∼100 nm gaps was used, the initial woven structure was high density, thus resulting in the formation of CNT agglomerates. Study results showed that CNT arrays grown on the flat substrate were of the highest purity and had a contact angle of 153.8 ± 0.9°. Thus, the self-organization behavior among CNTs was in situ modulated by different substrate morphology without further treatments. This provides us with an additional understanding of the self-organization of CNTs during growth, as well as strategies for the controllable synthesis of CNTs with fixed properties.
在本文中,在相同生长条件下,通过在具有不同微观结构的石英衬底上进行自组装,合成了疏水性碳纳米管(CNT)阵列、绳状物和团聚物。在平坦衬底上,形成了均匀的编织结构,从而同步生长成阵列。当采用表面分布有10 µm圆形凹坑的衬底时,编织结构是零星的,并且在凹坑中生长出CNT簇。随着进一步生长,CNT绳状物自组装形成。随后,当使用由不规则的约100 nm间隙组成的衬底时,初始编织结构密度很高,从而导致形成CNT团聚物。研究结果表明,在平坦衬底上生长的CNT阵列纯度最高,接触角为153.8±0.9°。因此,无需进一步处理,通过不同的衬底形态原位调节了CNT之间的自组装行为。这为我们提供了对CNT生长过程中自组装的额外理解,以及可控合成具有固定特性的CNT的策略。