Department of Imaging Physics, UT MD Anderson Cancer Center, Houston, TX 77030, USA.
Med Phys. 2011 Sep;38(9):5176-85. doi: 10.1118/1.3627149.
A new positron emission mammography (PEM) device (PEM Flex Solo II, Naviscan Inc., San Diego, CA) has recently been introduced and its performance characteristics have been documented. However, no systematic assessment of its limit of detectability has been evaluated. The aim of this work is to investigate the limit of detectability of this new PEM system using a novel, customized breast phantom.
Two sets of F-18 infused gelatin breast phantoms of varying thicknesses (2, 4, 6, and 8 cm) were constructed with and without (blank) small, shell-less contrast objects (2 mm thick disks) of varying diameters (3-14.5 mm) [volumes: 0.15-3.3 cc] and activity concentration to background ratio (ACR) (2.7-58). For the phantom set with contrast objects, the disks were placed centrally inside the phantoms and both phantom sets were imaged for a period of 10 min on the PEM device. In addition, scans for the 2 and 6 cm phantoms were repeated at different times (0, 90, and 150 min) post phantom construction to evaluate the impact of total activity concentration (count density) on lesion detectability. Each object from each phantom scan was then segmented and placed randomly in a corresponding blank phantom image. The resulting individual images were presented blindly to seven physician observers (two nuclear medicine and five breast imaging radiologists) and scored in a binary fashion (1-correctly identified object, 0-incorrect). The sensitivity, specificity, and accuracy of lesion detectability were calculated and plots of sensitivity versus ACR and lesion diameters for different phantom thicknesses and count density were generated.
The overall (mean) detection sensitivity across all variables was 0.68 (95% CI: [0.64, 0.72]) with a corresponding specificity of 0.93 [0.87, 0.98], and diagnostic accuracy of 0.72 [0.70, 0.75]. The smallest detectable object varied strongly as a function of ACR, as sensitivity ranged from 0.36 [0.29, 0.44] for the smallest lesion size (3 mm) to 0.80 [0.75, 0.84] for the largest (14.5 mm).
The detectability performance of this PEM system demonstrated its ability to resolve small objects with low activity concentration ratios which may assist in the identification of early stage breast cancer. The results of this investigation can be used to correlate lesion detectability with tumor size, ACR, count rate, and breast thickness.
最近推出了一种新的正电子发射乳房断层扫描(PEM)设备(PEM Flex Solo II,Naviscan Inc.,圣地亚哥,CA),并记录了其性能特征。然而,尚未对其检测极限进行系统评估。本研究的目的是使用新型定制乳房体模来评估该新型 PEM 系统的检测极限。
构建了两组不同厚度(2、4、6 和 8 cm)的 F-18 注入明胶乳房体模,其中一组有(有对比物)和一组没有(空白)小的、无壳的对比物(2 毫米厚的圆盘),直径为 3-14.5 毫米[体积:0.15-3.3 cc]和活性浓度与背景比(ACR)(2.7-58)。对于有对比物的体模组,将圆盘放置在体模内部的中心位置,并用 PEM 设备对两组体模进行了 10 分钟的扫描。此外,还在体模构建后不同时间(0、90 和 150 分钟)对 2 和 6 cm 体模进行了重复扫描,以评估总活动浓度(计数密度)对病变检测的影响。从每个体模扫描的每个物体都被分割并随机放置在相应的空白体模图像中。然后,将生成的单个图像呈现给七位医师观察者(两位核医学医师和五位乳腺成像放射科医师),并以二进制方式进行评分(1-正确识别的物体,0-不正确)。计算了病变检测的敏感性、特异性和准确性,并绘制了不同体模厚度和计数密度下的敏感性与 ACR 和病变直径的关系图。
所有变量的总体(平均)检测敏感性为 0.68(95%置信区间:[0.64,0.72]),相应的特异性为 0.93[0.87,0.98],诊断准确性为 0.72[0.70,0.75]。最小可检测物体强烈地随 ACR 而变化,因为敏感性范围从最小病变尺寸(3 毫米)的 0.36[0.29,0.44]到最大病变尺寸(14.5 毫米)的 0.80[0.75,0.84]。
该 PEM 系统的检测性能证明了其能够分辨低活性浓度比的小物体,这可能有助于识别早期乳腺癌。本研究的结果可用于将病变检测与肿瘤大小、ACR、计数率和乳房厚度相关联。