Department of Orthopaedics, Woodend Hospital, Aberdeen, Scotland, UK.
J Shoulder Elbow Surg. 2012 Jun;21(6):804-7. doi: 10.1016/j.jse.2011.09.024. Epub 2011 Dec 23.
The purpose of the study was to evaluate whether use of a bi-polar radiofrequency (RF) ablation wand would cause excess heating, which may lead to collateral damage to the surrounding tissues during arthroscopic subacromial decompression. Cadaveric studies have shown that high temperatures can potentially be reached when using RF ablation wands in arthroscopic shoulder surgery. Only 1 other published study assesses these temperature rises in the clinical setting.
Fifteen patients were recruited to participate in the study. A standard arthroscopic subacromial decompression was performed using continuous flow irrigation, with intermittent use of the RF ablation wand for soft tissue debridement. The temperature of the irrigation fluid within the subacromial bursa and the outflow fluid from the suction port of the wand were measured during the procedure using fiber-optic thermometers.
The mean peak temperature recorded in the subacromial bursa was 32.0°C (29.3-43.1°C), with a mean rise from baseline of 9.8°C. The mean peak temperature recorded from the outflow fluid from the wand was 71.6°C (65.6-77.6°C), with a mean rise from baseline of 49.4°C.
High temperatures were noted in the outflow fluid from the wand; however, this was not evident in the subacromial bursa itself. Use of room temperature inflow fluid, maintenance of flow through the bursa, and avoidance of prolonged uninterrupted use of the wand all appear to ensure that safe temperatures are maintained in the subacromial bursa not only in the laboratory but also in a clinical setting.
本研究旨在评估在关节镜下肩峰下减压术中使用双极射频(RF)消融管是否会导致过度加热,从而导致周围组织的附带损伤。尸体研究表明,在关节镜肩袖手术中使用 RF 消融管时可能会达到高温。仅有 1 项其他已发表的研究评估了这些临床环境中的温度升高。
招募了 15 名患者参与研究。使用持续流动冲洗进行标准关节镜下肩峰下减压术,并间歇性使用 RF 消融管进行软组织清创。使用光纤温度计在手术过程中测量肩峰下滑囊内冲洗液和消融管抽吸口流出液的温度。
肩峰下滑囊内记录的平均峰值温度为 32.0°C(29.3-43.1°C),与基线相比平均升高 9.8°C。从消融管流出液中记录的平均峰值温度为 71.6°C(65.6-77.6°C),与基线相比平均升高 49.4°C。
从消融管流出液中注意到了高温;然而,在肩峰下滑囊中并未出现这种情况。使用室温流入液、保持滑液通过、避免长时间连续使用消融管,这些措施似乎可以确保在实验室和临床环境中,肩峰下滑囊内保持安全温度。