Saito Masashi, Ikenaga Yuki, Matsukawa Mami, Watanabe Yoshiaki, Asada Takaaki, Lagrée Pierre-Yves
Laboratory of Ultrasonic Electronics, Doshisha University, 1-3 Tatara-Miyakodani, Kyotanabeshi, Kyoto, 610-0321, Japan.
J Biomech Eng. 2011 Dec;133(12):121005. doi: 10.1115/1.4005472.
Pulse wave evaluation is an effective method for arteriosclerosis screening. In a previous study, we verified that pulse waveforms change markedly due to arterial stiffness. However, a pulse wave consists of two components, the incident wave and multireflected waves. Clarification of the complicated propagation of these waves is necessary to gain an understanding of the nature of pulse waves in vivo. In this study, we built a one-dimensional theoretical model of a pressure wave propagating in a flexible tube. To evaluate the applicability of the model, we compared theoretical estimations with measured data obtained from basic tube models and a simple arterial model. We constructed different viscoelastic tube set-ups: two straight tubes; one tube connected to two tubes of different elasticity; a single bifurcation tube; and a simple arterial network with four bifurcations. Soft polyurethane tubes were used and the configuration was based on a realistic human arterial network. The tensile modulus of the material was similar to the elasticity of arteries. A pulsatile flow with ejection time 0.3 s was applied using a controlled pump. Inner pressure waves and flow velocity were then measured using a pressure sensor and an ultrasonic diagnostic system. We formulated a 1D model derived from the Navier-Stokes equations and a continuity equation to characterize pressure propagation in flexible tubes. The theoretical model includes nonlinearity and attenuation terms due to the tube wall, and flow viscosity derived from a steady Hagen-Poiseuille profile. Under the same configuration as for experiments, the governing equations were computed using the MacCormack scheme. The theoretical pressure waves for each case showed a good fit to the experimental waves. The square sum of residuals (difference between theoretical and experimental wave-forms) for each case was <10.0%. A possible explanation for the increase in the square sum of residuals is the approximation error for flow viscosity. However, the comparatively small values prove the validity of the approach and indicate the usefulness of the model for understanding pressure propagation in the human arterial network.
脉搏波评估是一种有效的动脉硬化筛查方法。在先前的一项研究中,我们证实了由于动脉僵硬度的原因,脉搏波形会发生显著变化。然而,脉搏波由两个分量组成,即入射波和多次反射波。为了理解体内脉搏波的本质,有必要弄清楚这些波的复杂传播情况。在本研究中,我们构建了一个压力波在柔性管中传播的一维理论模型。为了评估该模型的适用性,我们将理论估计值与从基本管模型和简单动脉模型获得的测量数据进行了比较。我们构建了不同的粘弹性管设置:两根直管;一根管连接到两根不同弹性的管;一个单分支管;以及一个具有四个分支的简单动脉网络。使用了柔软的聚氨酯管,其配置基于真实的人体动脉网络。材料的拉伸模量与动脉的弹性相似。使用可控泵施加射血时间为0.3秒的脉动流。然后使用压力传感器和超声诊断系统测量内部压力波和流速。我们从纳维 - 斯托克斯方程和连续性方程推导出一个一维模型,以描述柔性管中的压力传播。该理论模型包括由于管壁引起的非线性和衰减项,以及从稳定的哈根 - 泊肃叶分布导出的流动粘度。在与实验相同的配置下,使用麦克科马克格式计算控制方程。每种情况下的理论压力波与实验波显示出良好的拟合。每种情况下残差的平方和(理论波形与实验波形之间的差异)<10.0%。残差平方和增加的一个可能解释是流动粘度的近似误差。然而,相对较小的值证明了该方法的有效性,并表明该模型对于理解人体动脉网络中的压力传播是有用的。