Suppr超能文献

从农业副产物制备的生物炭上从水溶液中吸附 Cu(II)离子。

Adsorption of Cu(II) ions from aqueous solutions on biochars prepared from agricultural by-products.

机构信息

Department of Environmental Engineering, Technical University of Crete, Politechnioupolis, 73100 Chania, Greece.

出版信息

J Environ Manage. 2012 Apr 15;96(1):35-42. doi: 10.1016/j.jenvman.2011.10.010. Epub 2011 Nov 25.

Abstract

In this study, the adsorption of Cu(II) from aqueous solutions by agricultural by-products, such as rice husks, olive pomace and orange waste, as well as compost, was evaluated. The aim was to obtain sorbent materials (biochars) through hydrothermal treatment (300 °C) and pyrolysis (300 °C and 600 °C). The effect of adsorbent dose, pH, contact time and initial Cu(II) concentration in batch-mode experiments was investigated. The optimum Cu(II) adsorption conditions was found to occur at 5-12 g/L adsorbent dose, initial pH 5-6, and reaction time 2-4 h. Furthermore, the adsorption kinetics were best described by the pseudo-second order model for all the tested materials, while the adsorption equilibrium best fitted by the linear and Freundlich isotherms. Comparing rice husks and olive pomace, the higher adsorption capacity resulted after pyrolysis at 300 °C. With respect to the orange waste and compost, the highest adsorption capacity was observed using biochars obtained after hydrothermal treatment and pyrolysis at 300 °C.

摘要

本研究评估了农业副产品(如稻壳、橄榄渣和橙皮废物)以及堆肥通过水热(300°C)和热解(300°C 和 600°C)处理后对水溶液中 Cu(II)的吸附。目的是通过水热(300°C)和热解(300°C 和 600°C)获得吸附剂材料(生物炭)。在批处理实验中考察了吸附剂剂量、pH 值、接触时间和初始 Cu(II)浓度的影响。发现最佳的 Cu(II)吸附条件是在 5-12 g/L 吸附剂剂量、初始 pH 值为 5-6 以及反应时间为 2-4 h 时出现。此外,所有测试材料的吸附动力学均最好由伪二级模型描述,而吸附平衡则最好由线性和 Freundlich 等温线描述。与稻壳和橄榄渣相比,在 300°C 下热解后,其吸附能力更高。就橙皮废物和堆肥而言,在 300°C 下水热和热解后获得的生物炭表现出最高的吸附能力。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验