Jovic Jovana, Fraisse Philippe, Coste Christine Azevedo, Bonnet Vincent, Fattal Charles
LIRMM, Department of Robotics, University of Montpellier 2, Montpellier, France.
IEEE Int Conf Rehabil Robot. 2011;2011:5975369. doi: 10.1109/ICORR.2011.5975369.
We investigated dynamic optimization as a tool to improve functional electrical stimulation (FES) assisted sit to stand transfers of paraplegic subjects. The objective would be to find optimal strategy for voluntary trunk movement, which would minimize hip, knee and ankle torques and demand minimal upper limb participation during the motion. Motion of the knee and the ankle were constrained by electrical stimulation. Motion capture (MOCAP) data, and signals from handle force sensors were acquired during FES-assisted rising motion of one paraplegic subject. Based on a 3 DOF dynamic model, we used an optimization algorithm in order to determine optimal trajectories in terms of minimizing joint torques for various conditions of force level applied to handles. Motion computed using the optimization process is compared with the one recorded during the experiment. Our results suggest that in order to minimize the sum of joint torques and arm effort participation, paraplegic patients should bend their body forward in order to use linear momentum of the trunk in sit off phase. This information can be used to design controller for closed-loop FES-assisted standing-up. The controller could use trunk motion to trigger legs stimulation in order to optimize body segment coordination.
我们研究了动态优化作为一种工具,以改善截瘫患者在功能性电刺激(FES)辅助下从坐姿到站立姿势的转移。目标是找到自愿躯干运动的最佳策略,该策略将使髋、膝和踝关节扭矩最小化,并在运动过程中使上肢参与度最小化。膝关节和踝关节的运动受电刺激约束。在一名截瘫患者的FES辅助起身运动过程中,采集了运动捕捉(MOCAP)数据以及来自手柄力传感器的信号。基于一个三自由度动态模型,我们使用一种优化算法,以便在施加于手柄的不同力水平条件下,根据最小化关节扭矩来确定最佳轨迹。将使用优化过程计算出的运动与实验期间记录的运动进行比较。我们的结果表明,为了使关节扭矩总和与手臂用力参与度最小化,截瘫患者应向前弯曲身体,以便在起身阶段利用躯干的线性动量。此信息可用于设计闭环FES辅助站立的控制器。该控制器可以利用躯干运动来触发腿部刺激,以优化身体节段协调性。