University of Vienna, Christian Doppler Laboratory for Molecular Recognition Materials, Department of Analytical Chemistry, Waehringerstrasse 38, A-1090 Vienna, Austria.
J Chromatogr A. 2012 Oct 12;1259:100-10. doi: 10.1016/j.chroma.2012.01.009. Epub 2012 Jan 10.
A new analysis strategy was employed for the establishment of a comprehensive qualitative and quantitative impurity profile of a stressed multi-constituent pharmaceutical drug formulation, namely a nutritional infusion solution composed of amino acids and dipeptides. To deal with the highly complex samples a multidimensional analysis approach was developed which made use of an off-line two-dimensional reversed-phase liquid chromatography (RPLC)×hydrophilic interaction chromatography (HILIC) separation and combination of complementary detection involving ion trap mass spectrometry (IT-MS) and a charged aerosol detector (CAD). The CAD is a mass-sensitive universal detector for non-volatile compounds with relatively consistent detector response. A universal calibration function was set up with a set of standards. This universal calibration function was then employed to quantify unknown impurities allowing their classification into those that need to be reported (>0.05% relative to the precursor compound), identified (>0.1%), and quantified (>0.15%). The dilemma of unavailability of authentic standards at this stage of research for quantification could thereby be circumvented. Relevant impurities above the reporting threshold were identified by IT-MS. Impurities detected comprised di-, tri- and tetrapeptides, cyclic dipeptides (diketopiperazines), pyroglutamic acid derivatives and their condensation products. Cross-validation with HPLC-MS/MS methods using synthesized authentic standards confirmed the results obtained by the presented multidimensional analysis assay.
采用了一种新的分析策略,以建立一个综合的定性和定量杂质概况的应激多成分药物制剂,即由氨基酸和二肽组成的营养输液。为了处理高度复杂的样品,开发了多维分析方法,该方法利用离线二维反相液相色谱(RPLC)×亲水相互作用色谱(HILIC)分离,并结合互补检测,包括离子阱质谱(IT-MS)和带电气溶胶检测器(CAD)。CAD 是一种通用的质量敏感型非挥发性化合物检测器,具有相对一致的检测器响应。建立了一个通用的校准函数,使用一组标准。然后,该通用校准函数用于定量未知杂质,允许将其分类为需要报告的杂质(相对于前体化合物的 0.05%以上)、鉴定的杂质(>0.1%)和定量的杂质(>0.15%)。在研究的现阶段,由于缺乏真实标准进行定量,从而可以避免这一困境。通过 IT-MS 鉴定出超过报告阈值的相关杂质。检测到的杂质包括二肽、三肽和四肽、环状二肽(二酮哌嗪)、焦谷氨酸衍生物及其缩合产物。使用合成的真实标准进行 HPLC-MS/MS 方法的交叉验证,证实了所提出的多维分析方法的结果。