Socie M J, Rovesti G L, Griffon D J, Elkhatib O, Mudrock R N, Kurath P
Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, IL, USA.
Vet Comp Orthop Traumatol. 2012;25(3):224-30. doi: 10.3415/VCOT-11-04-0053. Epub 2012 Mar 26.
To evaluate strategies for increasing the axial stiffness of a hybrid external bone fixator.
Type Ia hybrid fixators, consisting of a uniplanar linear component connected to a circular ring, were tested in displacement controlled loading in axial compression. The basic hybrid construct was modified to explore strategies considered to increase fixator stiffness including: decreasing ring diameter, increasing ring thickness, adding pins to the ring fixation, and adding struts between the ring and vertical post components of the device. Stiffness in the initial phase of loading was compared between the groups.
The addition of a single diagonal bar between the ring and linear connecting rail did not significantly improve the stiffness of constructs. However, the addition of two half-pins to the ring, the addition of two struts between the ring and linear connecting rail, or decreasing the internal ring diameter from 115 to 85 mm progressively increased the stiffness of the frame. The most effective strategy consisted of increasing the thickness of the ring from 6 to 12 mm, thereby increasing the stiffness of the control frame by 335%.
Modulating the ring thickness, adding two struts between the ring and linear connecting rail, and reducing the ring diameter appear to be the most effective, simple, and clinically versatile ways to increase axial stiffness, most likely due to their impact on reducing ring bending.
