Environmental and Water Resources Engineering Division, Indian Institute of Technology Madras, Chennai 600 036, India.
Bioresour Technol. 2012 Jun;114:149-59. doi: 10.1016/j.biortech.2012.03.035. Epub 2012 Mar 19.
Biodegradation of chloroform along with a mixture of VOCs (methanol, ethanol, acetone and toluene) commonly found in pharmaceutical emissions using a biotrickling filter (BTF) was evaluated. The performance of the BTF was evaluated for both steady and transient conditions, for different inlet loading rates (ILR), empty bed residence time (EBRT) and inlet chloroform concentrations. Among the VOCs studied before chloroform feeding, toluene removal was the least, under all the operating conditions. Complete removal of all pollutants was achieved up to a chloroform loading rate of 14.22 g/m(3)/h. Increase in loading rate of chloroform adversely affected the removal efficiency of toluene and declined the overall performance of BTF. The results suggest that biodegradation of VOCs is influenced by the inlet loading rate and complexity of pollutants in the inlet air stream. Results from studies on shock loading and starvation indicated that the system was highly resilient to transient operating conditions.
采用生物滴滤塔(BTF)评价了在制药排放物中常见的氯仿与混合挥发性有机化合物(甲醇、乙醇、丙酮和甲苯)的生物降解情况。在不同的入口负荷率(ILR)、空床停留时间(EBRT)和入口氯仿浓度下,对 BTF 的稳定和瞬态条件进行了性能评估。在进料氯仿之前研究的 VOC 中,在所有操作条件下,甲苯的去除率最低。在氯仿负荷率为 14.22 g/m(3)/h 时,所有污染物均被完全去除。氯仿负荷率的增加对甲苯去除效率产生不利影响,降低了 BTF 的整体性能。结果表明,VOC 的生物降解受入口负荷率和入口空气流中污染物复杂性的影响。对冲击负荷和饥饿的研究结果表明,该系统对瞬态操作条件具有很强的弹性。