Institute for Advanced Chemistry of Catalonia, Spanish Council for Scientific Research (IQAC-CSIC), Barcelona, Spain.
Langmuir. 2012 Aug 21;28(33):12334-40. doi: 10.1021/la302120f. Epub 2012 Aug 6.
A novel and simple single-step method for the preparation of meso/macroporous silica materials is described, which consists in templating in highly concentrated emulsions with a cubic liquid crystal in the continuous phase. Tetraethyl orthosilicate (TEOS) was solubilized in the aqueous continuous phase of highly concentrated emulsions stabilized by C(12)(EO)(8) and a PEO-PPO-PEO block copolymer nonionic surfactant, with a cubic liquid crystalline phase of the Fd3m type. The resulting silica materials were characterized by small-angle X-ray scattering, nitrogen sorption and transmission electron microscopy. The results showed that a dual pore size distribution was obtained, consisting of mesopores in the nanometer range and macropores between 1 and 5 μm. These dual meso/macroporous silicas with bimodal pore size distribution can possess specific surface areas higher than 400 m(2)/g.
描述了一种新颖而简单的介孔/大孔硅材料的一步制备方法,该方法包括在具有立方液晶的连续相中用高浓度乳液进行模板化。正硅酸乙酯(TEOS)溶于由 C(12)(EO)(8)和聚氧乙烯-聚氧丙烯-聚氧乙烯嵌段共聚物非离子表面活性剂稳定的高浓度乳液的连续相中,具有 Fd3m 型立方液晶相。所得二氧化硅材料通过小角 X 射线散射、氮气吸附和透射电子显微镜进行了表征。结果表明,得到了具有纳米级介孔和 1 至 5 μm 之间大孔的双孔尺寸分布。这些具有双模态孔径分布的双介孔/大孔硅可以具有高于 400 m2/g 的比表面积。