Suppr超能文献

一种在插入儿童时对 LMA 套囊进行部分充气的简单方法,以便在插入后无需调整即可获得套囊压力。

A simple method of partial inflation of the LMA cuff before insertion in children to allow cuff pressure without adjustment after insertion.

机构信息

Department of Anesthesiology and Pain Medicine, Yonsei University College of Medicine, Seoul, Korea.

出版信息

Korean J Anesthesiol. 2012 Jun;62(6):524-8. doi: 10.4097/kjae.2012.62.6.524. Epub 2012 Jun 19.

Abstract

BACKGROUND

The cuff of the laryngeal mask airway (LMA) is preferred to be partially inflated before insertion in pediatric cases. However, it is not known how much inflation is appropriate. In addition, intra-cuff pressure is not routinely monitored in many institutions despite the fact that a neglected high cuff pressure could cause several complications. This study was conducted to determine whether the cuff inflated with its resting volume before insertion could have a clinically tolerable intra-cuff pressure after insertion.

METHODS

One hundred fifty unpremedicated children aged 0 to 9 yrs were enrolled. The pilot balloon valve was connected to a piston-free syringe to keep the valve open to the atmosphere and allowing the pressure within the cuff of to LMA to equalize to atmospheric pressure. Anesthesia was induced with 6 vol% of sevoflurane in oxygen. After insertion and final positioning of the LMA, the intra-cuff pressure was measured using a cuff pressure manometer.

RESULTS

The mean intra-cuff pressure was 50 ± 12.9 cmH(2)O; intra-cuff pressures were 39.1 ± 9.3, 51.6 ± 11.2, and 64.6 ± 12.5 cmH(2)O for LMAs of sizes 1.5, 2, and 2.5, respectively. Intra-cuff pressure of more than 60 cmH(2)O was measured in 26 patients, and the median value was 70 cmH(2)O. There was weak statistical correlation among age, height, and weight with intra-cuff pressure.

CONCLUSIONS

The cuff inflated by the resting volume before insertion may be a simple method for guaranteeing tolerable cuff pressure after insertion.

摘要

背景

在小儿病例中,喉罩气道(LMA)的套囊通常需要在插入前部分充气。然而,目前尚不清楚合适的充气量是多少。此外,尽管忽视高套囊压力可能会导致多种并发症,但许多机构并未常规监测套囊内压。本研究旨在确定插入前按套囊静息容积充气是否可使插入后套囊内压达到临床可接受水平。

方法

本研究纳入了 150 名 0 至 9 岁的未行预麻醉的儿童。将测压阀连接到无活塞注射器,使阀门保持开放以与大气相通,从而使 LMA 套囊内的压力与大气压相等。以 6 vol%七氟醚氧吸入诱导麻醉。插入并最终定位 LMA 后,使用套囊测压计测量套囊内压。

结果

平均套囊内压为 50 ± 12.9 cmH₂O;套囊内压分别为 39.1 ± 9.3、51.6 ± 11.2 和 64.6 ± 12.5 cmH₂O,用于 1.5、2 和 2.5 号 LMA。26 例患者的套囊内压超过 60 cmH₂O,中位数为 70 cmH₂O。套囊内压与年龄、身高和体重之间存在微弱的统计学相关性。

结论

插入前按套囊静息容积充气可能是一种确保插入后套囊内压可接受的简单方法。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/3bde/3384789/7ea03f055866/kjae-62-524-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验