Center for Biomedical Engineering, University of Kentucky, Lexington, Kentucky 40506-0070, USA.
Tissue Eng Part A. 2012 Dec;18(23-24):2590-600. doi: 10.1089/ten.TEA.2011.0588. Epub 2012 Aug 21.
A significant barrier to the success of engineered tissues is the inadequate transport of nutrients and gases to, and waste away from, cells within the constructs, after implantation. Generation of microtubular networks by endothelial cells in engineered constructs to mimic the in vivo transport scheme is essential for facilitating tissue survival by promoting the in vitro formation of microvessels that integrate with host microvasculature, after implantation. Previously, we reported that select pressures stimulate endothelial proliferation involving protubulogenic molecules such as fibroblast growth factor-2 (FGF-2) and vascular endothelial growth factor-C (VEGF-C). Based on this, we investigated fluid pressure as a selective modulator of early tubulogenic activity with the intent of assessing the potential utility of this mechanical stimulus as a tissue-engineering control parameter. For this purpose, we used a custom pressure system to expose two-dimensional (2D) and three-dimensional (3D) cultures of endothelial cells to static pressures of 0 (controls), 20, or 40 mmHg for 3 days. Compared to controls, 2D endothelial cultures exposed to 20, but not 40 mmHg, exhibited significantly (p<0.05) enhanced cell growth that depended on VEGF receptor-3 (VEGFR-3), a receptor for VEGF-C. Moreover, endothelial cells grown on microbeads and suspended in 3D collagen gels under 20 mmHg, but not 40 mmHg, displayed significantly (p<0.05) increased sprout formation. Interestingly, pressure-dependent proliferation and sprout formation occurred in parallel with pressure-sensitive upregulation of VEGF-C and VEGFR-3 expression and were sensitive to local FGF-2 levels. Collectively, the results of the present study provided evidence that early endothelial-related tubulogenic activity depends on local hydrostatic pressure levels in the context of local growth factor conditions. In addition to relevance to microvascular diseases associated with interstitial hypertension (e.g., cancer and glaucoma), these findings provided first insight into the potential utility of hydrostatic pressure as a fine-tune control parameter to optimize microvascularization of tissue-engineering constructs in the in vitro setting before their implantation.
工程组织中,一个显著的障碍是营养物质和气体向植入物内细胞的传输不足,以及细胞代谢废物的排出。在工程组织中,内皮细胞生成微管状网络以模拟体内的运输方案对于促进组织存活至关重要,因为这可以促进微脉管在体外的形成,并在植入后与宿主微血管整合。此前,我们报道了选择压力会刺激内皮细胞增殖,涉及突起发生分子,如成纤维细胞生长因子-2(FGF-2)和血管内皮生长因子-C(VEGF-C)。基于这一点,我们研究了流体压力作为早期管状活动的选择性调节剂,目的是评估这种机械刺激作为组织工程控制参数的潜力。为此,我们使用定制的压力系统将二维(2D)和三维(3D)培养的内皮细胞暴露于 0(对照)、20 或 40mmHg 的静态压力下 3 天。与对照组相比,暴露于 20mmHg 而非 40mmHg 的 2D 内皮细胞培养物表现出显著(p<0.05)的细胞生长增强,这取决于 VEGF 受体-3(VEGFR-3),即 VEGF-C 的受体。此外,在 20mmHg 而非 40mmHg 下,在微珠上生长并悬浮在 3D 胶原凝胶中的内皮细胞显示出明显(p<0.05)增加的芽形成。有趣的是,压力依赖性增殖和芽形成与压力敏感的 VEGF-C 和 VEGFR-3 表达上调平行发生,并且对局部 FGF-2 水平敏感。总之,本研究的结果提供了证据,表明早期内皮相关管状活动取决于局部生长因子条件下的局部静水压力水平。除了与间质高血压相关的微血管疾病(例如癌症和青光眼)有关外,这些发现还首次揭示了静水压力作为精细调节参数的潜力,以优化植入前体外组织工程构建物的微血管化。