Tuning of water and hydroxide content of intercalated Ruddlesden-Popper-type oxides in the PrSr3Co1.5Fe1.5O(10-δ) system.

A series of hydration experiments of the Ruddlesden-Popper phase PrSr(3)Co(1.5)Fe(1.5)O(10-δ) with varying levels of oxygen nonstoichiometry were performed with the goal to clarify phase formation and underlying mechanisms and driving forces. The hydration reaction is most intense for partly reduced samples with a vacancy concentration corresponding to δ ≈ 1. Fully oxidized samples show little or no tendency toward hydration. Presence of oxygen vacancies acts as a prerequisite for hydration. Probably, the basicity of the materials owing to A-site cations is another contributing factor to the hydration ability. Under CO(2) free conditions pure hydrates and oxide hydroxides are formed. In CO(2)-containing atmosphere, additional carbonate anions are easily incorporated into the hydrate, probably at the expense of hydroxyl groups. The I-centered PrSr(3)Co(1.5)Fe(1.5)O(8)(OH)(2)·1H(2)O achieves a highly expanded c-axis upon the topochemical insertion reactions. In situ powder synchrotron X-ray diffraction (SXRD) shows that the hydrate converts to an oxide hydroxide, PrSr(3)Co(1.5)Fe(1.5)O(8)(OH)(2), at 70 °C with a primitive orthorhombic unit cell. Upon heating above 170 °C, an I-centered product is formed for which further dehydroxylation occurs at around 400-500 °C. Rietveld refinement of SXRD data shows that the absorbed water molecules fill the tetrahedral voids of the AO rock salt layer of the monoclinic hydrate.