Ishay Eldad Ben, Hazan Gershon, Rahamim Gil, Amir Dan, Haas Elisha
The Goodman Faculty of Life Sciences, Bar Ilan University, Ramat Gan 52900, Israel.
Rev Sci Instrum. 2012 Aug;83(8):084301. doi: 10.1063/1.4737632.
The information obtained by studying fluorescence decay of labeled biopolymers is a major resource for understanding the dynamics of their conformations and interactions. The lifetime of the excited states of probes attached to macromolecules is in the nanosecond time regime, and hence, a series of snapshot decay curves of such probes might - in principle - yield details of fast changes of ensembles of labeled molecules down to sub-microsecond time resolution. Hence, a major current challenge is the development of instruments for the low noise detection of fluorescence decay curves within the shortest possible time intervals. Here, we report the development of an instrument, picosecond double kinetics apparatus, that enables recording of multiple fluorescence decay curves with picosecond excitation pulses over wide spectral range during microsecond data collection for each curve. The design is based on recording and averaging multiphoton pulses of fluorescence decay using a fast 13 GHz oscilloscope during microsecond time intervals at selected time points over the course of a chemical reaction or conformational transition. We tested this instrument in a double kinetics experiment using reference probes (N-acetyl-tryptophanamide). Very low stochastic noise level was attained, and reliable multi-parameter analysis such as derivation of distance distributions from time resolved FRET (fluorescence resonance excitation energy transfer) measurements was achieved. The advantage of the pulse recording and averaging approach used here relative to double kinetics methods based on the established time correlated single photon counting method, is that in the pulse recording approach, averaging of substantially fewer kinetic experiments is sufficient for obtaining the data. This results in a major reduction in the consumption of labeled samples, which in many cases, enables the performance of important experiments that were not previously feasible.
通过研究标记生物聚合物的荧光衰减所获得的信息,是理解其构象和相互作用动力学的主要资源。附着在大分子上的探针激发态寿命处于纳秒时间尺度,因此,原则上,此类探针的一系列瞬态衰减曲线可能会给出标记分子集合体快速变化的细节,时间分辨率可达亚微秒。因此,当前的一个主要挑战是开发能够在尽可能短的时间间隔内对荧光衰减曲线进行低噪声检测的仪器。在此,我们报告了一种仪器——皮秒双动力学装置的开发,该装置能够在每条曲线微秒级的数据采集过程中,利用皮秒激发脉冲在宽光谱范围内记录多条荧光衰减曲线。其设计基于在化学反应或构象转变过程中的选定时间点,在微秒时间间隔内使用快速13 GHz示波器记录和平均多光子荧光衰减脉冲。我们使用参考探针(N - 乙酰色氨酸酰胺)在双动力学实验中测试了该仪器。实现了非常低的随机噪声水平,并完成了可靠的多参数分析,例如从时间分辨荧光共振能量转移(FRET)测量中推导距离分布。相对于基于已确立的时间相关单光子计数方法的双动力学方法,此处使用的脉冲记录和平均方法的优势在于,在脉冲记录方法中,只需对数量少得多的动力学实验进行平均就足以获得数据。这使得标记样品的消耗大幅减少,在许多情况下,能够开展以前无法进行的重要实验。